Summary Of Product Parts - SMC Networks PF2A712H Operation Manual

Summary of Product parts

Body
Item
Monitor part
Piping port
Body
Connector
Lead wire and connector
Monitor part
Item
LCD display
Indicator LED (reference condition)
Indicator LED (output)
Indicator LED (flow rate)
Unit display
button ( UP)
button (SET )
button (MODE)
button ( DOWN)
See below.
Connected to the fluid inlet at IN side and to the fluid outlet at OUT side.
The body of the product.
Connector for electrical connections.
Lead wire to supply power and transmit output signals.
Displays the flow value, setting mode, and error indication.
Indicates the reference condition selected. LED is ON (Red) when standard
condition is selected.
Indicates the output status of OUT1. LED is ON (Red) when OUT1 is ON.
The LED flashes when an over current error occurs.
Flashes at intervals proportional to the flow rate.
Indicates the unit currently selected.
Selects the mode or increases the ON/OFF Set value.
Press this button to change to another mode and to set a value.
Moves on to the function selection mode.
Selects the mode or decreases the ON/OFF Set value.
-11-
(On the product)
Description
Description
No.PF※※-OMG0010-G
Connector pin
numbers
1 DC(+)
Analogue
2
output
3 DC(-)
4 OUT1