F_0 Initialize Mode - SMC Networks PF2A712H Operation Manual

■[F_0] Initialize mode
Items below can be set one by one.
<Operation>
Press the , and
Selection of display mode
Refer to page 22.
The product with unit selection function
Unit selection function
Refer to page 23.
: Operate only the product with unit selection function.
Selection of output mode
Refer to page 24.
Input of the Set point
Refer to page 27.
Selection of switch operation
Refer to page 25.
Key-lock function
Refer to page 26.
buttons in function selection mode to display [F_0].
Setting of initialize mode is completed.
Return to measurement mode.
-21-
Press the button.
Press the button.
Press the button.
Press the button.
Press the button.
Press the button.
Press the button.
SI unit only
No.PF※※-OMG0010-G