F0 Selection Of Connected Sensor; Unit Selection Function - SMC Networks PFM3 Series Operation Manual

■[F 0] Selection of connected sensor
Selection of connected sensor
The sensor to be connected must be selected before using the product.
If the connected sensor is changed, the accumulated flow value (set value), peak/bottom display value
and the zero clear adjustment value will all return to the default setting.
Unit selection function
This function is only available for products with the unit selection function.
3
L/min or CFM (ft /min) x 10
: When the products other than unit selection type are used, this function is not displayed.
<Operation>
Press the or
Select connected sensor
Press the or

Unit selection function

[Uni] and the set value are displayed in turn.
Press the or

Unit selection function
-2
is selectable for the displayed units.
button in function selection mode to display [F 0].
Press the button.
button to select.
Press the button.
button to select.
Press the button.
Setting of [F 0] Unit selection function completed
Return to function selection mode.
-22-
No.PF※※-OMJ0018-F