SMC Networks PF2A712H Operation Manual page 29

When Accumulated output mode is selected
The value can be set up to 9999999999 L (999999999.9 ft
divided into upper, middle, and lower digits. When setting the value, it is divided into upper, middle and lower
digits.
Display Maximum flow
unit display value
L display
9999999999 L
[ U_1]

ft display
999999999.9 ft
[ U_2]
: Operate only the product with unit selection function.
<Operation>
Press the , and
Input of the Set point
Input of the Set value for the lower digits
 1
[ n_3] and the current Set value
(Lower digits) are displayed in turn.
Press the and
the value referring to list of outputs (page
19).
Input of the Set value for the middle digits
 1
[ n_3] and the current Set value
(Middle digits) are displayed in turn.
Press the and
the value referring to list of outputs (page
19).
Input of the Set value for the upper digits
 1
[ n_3] and the current Set value
(Upper digits) are displayed in turn.
Press the and
the value referring to list of outputs (page
19).
1: When Non-Reverse output has been selected as the switch operation, [P_3] is displayed.
2: This diagram shows an example when L display ([ U_1]) is selected.
: Accumulation starts when power is supplied.
Upper digits
3
9999 m x 10
(9999
3 6
999 ft x 10
3
(999 . ft
buttons in function selection mode to display [F_6].
button to change
button to change
button to change
Setting of Set point is completed.
Return to measurement mode.
-28-
3
). The display digits for accumulated flow are
Display digits
Middle digits
3 3
999 m
L) (999 L)
3 3
999 ft x 10
3 3
) (999 . ft )
Press the button.
Press the button 3 seconds or longer.
Lower digits
999 L
3
999.9 ft
No.PF※※-OMG0010-G