F0 Unit Selection Function - SMC Networks ZK2-ZSV-A Series Operation Manual

■[F 0] Unit selection function
Setting is only possible when using a product with the unit selection function.
(kPa/MPa can still be selected if the product does not have the unit selection function.)
<Operation>
Press the or button in function selection mode to display [F 0].
Selection of the display unit
Press the or
Display unit and minimum setting unit.
MPa
0.001
Press the button.
button to select the display unit.
Press the button to set.
Setting of [F 0] Unit selection function completed.
2
kPa kgf/cm
0.1 0.001
Move on to select the display unit.
Return to function selection mode.
Unit
bar psi
0.001 0.02
-24-
InHg mmHg
0.1 1
NO.ZK2-OM00501-B