F0 Unit Selection Function - SMC Networks ZL6 Series Operation Manual

■[F 0] Unit selection function
Setting is only possible when using a product with the unit selection function.
(kPa/MPa can still be selected if the product does not have the unit selection function.)
<Operation>
Press the or button in function selection mode to display [F 0].
Selection of the display unit
Press the or
•Display unit and minimum setting unit.
MPa
0.001
Press the button.
button to select the display unit.
Press the button to set.
Setting of [F 0] Unit selection function completed.
2
kPa kgf/cm
0.1 0.001
Move on to select the display unit.
Return to function selection mode.
Unit
bar psi
0.001 0.02
-23-
InHg mmHg
0.1 1
NO.ZL3-OM00701-A