Function Selection Mode - SMC Networks PF2A712H Operation Manual

Function selection mode

Function selection mode
In measurement mode, press the
This [F_ ] indicates the mode for changing each functional setting.
●Default settings
Selection of display mode
Unit selection function
Selection of output mode
Input of Set point 1
[F_0]
Input of Set point 2
Input of hysteresis
Selection of switch operation
Key-lock function
[F_1] Selection of display mode
[F_2] Unit selection function
Selection of output mode
Input of Set point 1
[F_3]
Input of Set point 2
Input of hysteresis
[F_4] Selection of switch operation
[F_5] Key-lock function
Input of Set point 1
[F_6] Input of Set point 2
Input of hysteresis
[F_7] Selection of reference condition
[F_8] Accumulated value hold
1: Operate only the product with unit selection function.
2: Setting is available when Set point 1 < Set point 2.
Not displayed when Set point 1≧Set point 2.
button, to display [F_0].
Item
1
2
1
2
2
-20-
Default Setting
[ d_1] Display instantaneous flow
[ U_1] L/min
[oU1_0] Instantaneous output mode
50% of max. rated flow
[1500] L/min(PF2A703H)
[3000] L/min(PF2A706H)
[6000] L/min(PF2A712H)
[ 0]
[oU1_n] Reverse output
[ UnL] Unlocked
[ d_1] Display instantaneous flow
[ U_1] L/min
[oU1_0] Instantaneous output mode
50% of max. rated flow
[1500] L/min(PF2A703H)
[3000] L/min(PF2A706H)
[6000] L/min(PF2A712H)
[ 0]
[oU1_n] Reverse output
[ UnL] Unlocked
50% of max. rated flow
50% of max. rated flow
[ 0]
[ Anr] Standard condition
[ oFF] Not held
Page
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 30
Page 31
No.PF※※-OMG0010-G