Outline Of Setting - SMC Networks PF2A712H Operation Manual

Outline of setting

The output will not operate for 3 seconds after supplying power.
The mode in which the flow is detected and displayed, and the switch output is operating.
This is the basic operating mode; and other modes should be selected for setting
changes and other function settings.
<When instantaneous flow is displayed>
The accumulated flow value can be displayed by pressing the
The display digits for accumulated flow can be changed by pressing the
button is pressed.
<When accumulated flow is displayed>
The instantaneous flow value can be displayed by pressing the
The display digits for accumulated flow can be changed by pressing the
flashes.). Press the
Accumulated flow can be displayed up to 9999999999 L (999999999.9 ft
The LCD display displays up to 5 digits at one time. The display is divided into three parts
(upper digits, middle digits and lower digits).
Maximum flow
Display unit
display value
L display
9999999999 L
[ U_1]

ft display
999999999.9 ft
[ U_2]
: Operate only the product with unit selection function.
Function selection mode
(Refer to page 20)
Power is supplied
The identification code of the product is displayed.
Measurement mode
button to set.
Upper digits
3
9999 m x 10
(9999
3
3
999 ft x 10
(999 . ft
button
press.
button.
button.
Display digits
Middle digits
3 3
999 m
L) (999 L)
6 3 3
999 ft x 10
3 3
) (999 . ft )
Other functions
(Refer to page 32)
-18-
button while the
button (unit
3 ).
Lower digits
999 L
3
999.9 ft
No.PF※※-OMG0010-G