Product Labels And Toasting Product - Roundup UTX-200L Manual

Product Labels and Toasting Product

The UTX-200L can toast Bagels, Muffins, Bun Crowns,
and Bun Heels, but not all products are inserted into the
toaster the same way.
Product Labels are placed on the toaster to illustrate
where and how specific products should be inserted for
proper toasting.
If the
Product Then insert the product as follows:
Label reads:
Insert Heel with the cut side facing
Heel the Platen. Refer to the appropriate
Product Label
Insert Crown with the cut side facing
Crown the Platen. Refer to the appropriate
Product Label
Insert the Muffin into the Breakfast
Muffin
Chute with the cut side face UP.
Insert the Bagel into the Breakfast
Bagel
Chute with the cut side face UP.
Items 1, 2, and 3 in this section show how to insert
product and product toasting routes.
NOTE: Always toast some test product at the start
of each day or whenever the unit mode is changed
to ensure proper toasting operation.
TOASTING MUFFINS OR BAGELS
1
Cut Side of
Muffin Or Bagel
(Facing up)
P/N 1010992 Rev. K 03/15
McDonald's
UNIVERSAL TOASTER UTX-200L
OPERATION (continued)
2
3
Insert Heels on the left side of the toaster only. Insert
The unit can toast 4 bagels or muffins across
at a time. However, bagels and muffins should
NOT be placed in the unit together. Use the
Muffin Bagel Selector buttons to enter the
appropriate mode for bagels or muffins.
NOTE: For all UTX-200 units, the product pass-
through time is 22 seconds (+/- 2 seconds).
9
TOASTING CROWNS AND HEELS
Crowns
Heels
Crowns on the right side only.
IMPORTANT
Cut Side of
Heel and Crown
(Facing forward)
Bagels OR
Muffins