Language Selection - Centrometal PelTec 12-48 Technical Instructions

6.0. DATE AND TIME
This option is used to set the date and time. This option is used to set the date and time. It
is necessary for starting times, and the recording of errors / warnings (for the occurrence
of errors / warnings, remembers the date and time of occurrence). After setting the date
and time it is necessary to press the ''CONFIRM'' for saving date and time. If there is a
significant clock delay or clock setting at 00:00 or the date on 1.1.2000. It is necessary to
Date & time
replace the battery on the back of the display (battery type CR 1220).
7.0. DISPLAY
7. Display:
Display
7.1. SCREENSAVER
Possible selection: Default: 600 seconds Minimum: 10 seconds
If at some time nothing was pressed on the screen, the screensaver will turn on, to prevent damage on
the screen. Once you touch the screen, the screensaver will turn of.

7.2. LANGUAGE SELECTION

Possible selection: Enabled (default), Disabled
This option enables or disables screen with the choice of language regulation when you turn-on
main switch. If is marked ''DISABLED'', after turning-on the main switch, it will be set on before
selected language and after some time, display will show the work display of the boiler (duration of
this screen can be adjusted in Section 7.3.).
7.3. WELCOME TIME
Possible selection: Default: 5 seconds
This option is used to set the desired duration of the initial message after turning on the main switch.
This option is only available if the option'' LANGUAGE SELECTION'' (point 7.2.) Is set
to''DISABLE''.
7.4. SOUND VOLUME
Possible selection: Default: Volume 3, OFF, volume 1, volume 2, volume 3
This option is used to set speaker volume.
7.5. SOUND TYPE
Possible selection: Default: Type 1, Type 1, Type 2, Type 3, Type 4 , Type 5, Type 6, Type 7,
Type 8, Type 9, Type 10
This option is used to adjust type of speaker sound. It is possible to choose between 10 different types
of sounds.
Technical instructions REGULATION PelTec / PelTec-lambda
7.1. Screensaver
7.2. Language selection
7.3. Welcome time
7.4. Sound volume
7.5. Sound type
Minimum: 0 seconds Maximum: 20 seconds
Date and time, Display
Maksimum: 3600 seconds
69