Centrometal PelTec 12-48 Technical Instructions page 44

Schedule
3.0. SCHEDULE
3.1. SCHEDULE
Possible selection:
Disable - Schedule is turned off (default)
Table 1 - Scheduled starting times are turned-on and work according to the settings in Table 1
Table 2 - Scheduled starting times are turned-on and work according to the settings in Table 2
Table 3 - Scheduled starting times are turned-on and work according to the settings in Table 3
ALWAYS WHEN SCHEDULE IS ENABLED (TABLE 1,2 OR 3)
ON THE MAIN SCREEN WILL APPEAR SYMBOL
44
3. SCHEDULE
1.
Schedule
2.
3.
4.
3.1. Schedule
Disable
Disable
Table 1
Technical instructions REGULATION PelTec / PelTec-lambda
Table 1
Table 2
Table 3
Default:
Disable
Table 2
Table 3