Screen, Symbols - Centrometal PelTec 12-48 Technical Instructions

Screen, Symbols

SYMBOLS
14
13
1
5
6
15k
7
16
8
17 11
1 - Boiler
2 - Pellet tank
3 - Pellet feeding screw
4 - 4-way mixing valve with motor device
(when working, left/right arrow will be shown)
5 - Symbol of fan operation
(when working, symbol is turning)
6 - Fan speed (rpm)
7 - Symbol of flue gas channel cleaner
(when working, symbol is moving)
8 - Symbol of electric heater
(when working, symbol changes color)
9 - Symbol of pellet feeding screw
(when working, symbol is moving)
10 - Symbol of mechanism for grate cleaning
(when working, symbol moves left/right)
11 - Current position of burner grate
(0% - closed, 100% - open)
*
Only on PelTec-lambda
**
Displaying these symbols depends on the configuration set up by an authorized service
***
For more informations about this symbol see "Technical instructions for vacuum wood pellet feeding system".
4
* * *
20
22
120°C
O2=8%
80°C
1700
0%
10 18 2
Technical instructions REGULATION PelTec / PelTec-lambda
3 19 4 15
30%
60°C
* * *
9 23
12 - Pellet level in the tank (3 levels)
13 - Boiler temperature sensor
14 - Flue gas sensor
15 - Flow temperature sensor
16 - Resistance of photocell (luminous intensity
of flame)
17 - Flame
(symbol appears when there is the flame)
18 - Symbol of microswitch in mechanism for
grate cleaning
19 - Percentage of openes of the 4-way mixing
valve with motor device
(0% - closed, 100% - open)
*
20 - The percentage of oxygen in the flue gases
* *
21 - The symbols in this section depend on the
selected configuration
* *
22 - External control symbol (see point 13.1)
***
23 - Suction system symbol (off,pause,on)
* *
21
12