Connection Reset; Important Notes - Centrometal PelTec 12-48 Technical Instructions

Internet supervision (additional equipment)
5.8.5 TIME ZONE
This option allows you to set the time zone if the boiler is in a different time zone than the web portal
server. (this option must be set if you enable "Time syncronisation option")

5.8.6 CONNECTION RESET

This option allows you to reset connection with home network.

IMPORTANT NOTES

CM WiFi-box requires active DHCP server of Access Point (e.g. router)
because manual setting of network parameters is not possible. For
more informations contact administrator of your home network.
To be able to use Cm WiFi box on PelTec/PelTec Lambda boiler, minimum
required software versions of the boiler regulation must be:
"v2.82m_30" / "v2.82m_30L"
You can check boiler version by pressing the "INFO" button under main
menu.
If there is older software version, it must be updated to be able to use
Cm WiFi box. For software update please contact authorized serviceman.
For detailed configuration of the Cm WiFi box please refer to the Cm WiFi
box manual received with the Cm WiFi box.
68
Technical instructions REGULATION PelTec / PelTec-lambda
Technical instructions REGULATION PelTec / PelTec-lambda
"v2.82m_270" / "v2.82m_270L"