4-6
Installing the 506/507/508
Terminal Tightening Torque
Refer to the Terminal Tightening torque table shown on page 4-2 for
both the Power and Control Terminals.
Field Grounding Terminals
The field grounding terminals are identified with the International
Grounding Symbol
Fitting
Figure 4.3 Product Mechanical Arrangement
Allow 50mm above and below product for cooling. Allow 8cm
access to one side of the unit. Mount the unit with the cover in place.
PANEL
MOUNTING
USE M4 FIXINGS
(IEC Publication 417, Symbol 5019).
A
C
E
www.comoso.com
B
DIN RAIL MOUNTING
Mounting clip can be easily
pushed to allow different
mounting configurations
F
D
506/507/508 - HA389427