Terminal Block Acceptance Sizes; Terminal Tightening Torques - Parker 650V series Technical Manual

Terminal Block Acceptance Sizes

Product Code
690PC/...
690PD/0150/...
690PD/0180/...
690PD/0220/...
690PD/0300/...
690PE/...
690PF/...
Note: The standard Frame E and Frame F terminals are not intended for flat busbar. A Power Terminal adaptor is
available to enable wiring with flat busbar, part number BE465483.
* The larger wire sizes can be used provided a crimp is fitted to the wire

Terminal Tightening Torques

Frame Size
Product Code
(Block 2 & 3)
Frame C 230V
Frame C 400/500V
Frame C 400/500V
Frame D
Frame E
Frame F
650V AC Drive
Wire sizes for Europe should be chosen with respect to the operating conditions and your local
National Electrical Safety Installation Requirements. Local wiring regulations always take
precedence. For North American UL wire sizes refer to Chapter 10: "Certification for the Drive"
- Requirements for UL Compliance.
Power Terminals
(minimum/maximum acceptance for aperture)
0.75 / 10mm
2.5 / 16mm
2.5 / 25mm
Solid
16 / 50mm 2
25/120mm 2
Model Recognition
Catalog Code
(Block 2 & 3)
0055/230 0007/230
0075/230 0010/230
0055/400
0007/460
0055/500
0075/400
0110/400
0010/460
0150/400
0015/460
0075/500
0020C/460
0110/500
0150/500
All All
All All
All All
2 (*16mm 2 )
2 (* 25mm 2 )
2 (* 35mm 2 )
Stranded
25 / 50mm 2 (* 70mm
35 / 95mm 2 (*120mm
Thermistor Power
& fan Terminals
supply
1.35Nm
N/A
(12 lb-in)
1.35Nm
N/A
(12 lb-in)
1.35Nm (12 lb-in)
enclosed terminal type
N/A
1.8Nm (16 lb-in)
open terminal type
4Nm
N/A
(35 lb-in)
0.7Nm 6-8Nm
(6.1 lb-in) (53-70 lb-in)
0.7Nm 15-20Nm
(6.1 lb-in) (132-177 lb-in)
Installing the Drive
Control Terminals
including Thermistor Terminals
2.5 mm
2.5 mm
2.5 mm
2 ) 2.5 mm
2 ) 2.5 mm
Brake
Terminals
1.35Nm
(12 lb-in)
1.35Nm
(12 lb-in)
1.35Nm
(12 lb-in)
4Nm
(35 lb-in)
6-8Nm
(53-70 lb-in)
0.7Nm
(6.1 lb-in)
3-17
2
2
2
2
2
Ground
Terminals
2.5Nm
(22 lb-in)
2.5Nm
(22 lb-in)
2.5Nm
(22 lb-in)
4.5Nm
(40 lb-in)
6-8Nm
(53-70 lb-in)
42Nm
(375 lb-in)