HP 3100 v2 Series Configuration Manual page 103

Figure 34 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE at a reboot. For the
seven patches in
to ACTIVE. The patch states in the system are as shown in
The patches that are in ACTIVE state are in DEACTIVE state after system reboot.
Figure 35 Patches are activated
RUNNING state
After you confirm ACTIVE patches, their states change to RUNNING and persist after a reboot. In
contrast to ACTIVE patches, RUNNING patches continue to take effect after a reboot. For example,
if you confirm the first three patches in
and the RUNNING state persists after a reboot. The patch states of the system are shown in
36.
Figure 34, if you activate the first five patches, their states change from DEACTIVE
Figure
Figure 35, their state changes from ACTIVE to RUNNING,
97
35.
Figure