Hotfix Configuration Example - HP 3100 v2 Series Configuration Manual

# Specify soft-version2.bin as the main startup system software image.
<Switch> boot-loader file soft-version2.bin slot 1 main
# Reboot the switch to complete the upgrade.
<Switch> reboot
3. Use the display version command to verify that the upgrade has succeeded. (Details not
shown.)

Hotfix configuration example

Network requirements
The software running on the switch in
the TFTP server. The switch and TFTP server can reach each other.
Hotfix the software on the switch.
Figure 38 Network diagram
TFTP client
1.1.1.1/24
Switch
Configuration procedure
1. Configure the TFTP server (the configuration varies with server vendors):
# Enable the TFTP server function. (Details not shown.)
# Save the patch file patch_xxx.bin to the working directory on the TFTP server. (Details not
shown.)
2. Configure the switch:
# Use the save command to save the current configuration. (Details not shown.)
# Examine the Flash on the switch for space insufficiency. If the free space is not sufficient for
the patch files, delete unused files to release enough space. (Details not shown.)
# Download the patch file patch_xxx.bin from the TFTP server to the root directory of the
switch's Flash.
<Switch> tftp 2.2.2.2 get patch_xxx.bin
# Install the patch.
<Switch> system-view
[Switch] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot
has a bug. The patch file patch_xxx.bin is saved on
Figure 38
2.2.2.2/24
Internet
103
TFTP server