Table of Contents
Advertisement
Configuring password authentication for modem dial-in (not
supported in FIPS mode)
Step
1.
Enter system view.
2.
Enter one or more AUX user
interface views.
3.
Enable password
authentication.
4.
Set a password.
5.
Configure common settings
for the AUX user interfaces.
The next time you attempt to dial in to the device, you must provide the configured login password.
Configuring scheme authentication for modem dial-in
Follow these guidelines when you configure scheme authentication for AUX login:
•
To make the command authorization or command accounting function take effect, apply an
HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of
the authorization server and other authorization parameters.
•
If the local authentication scheme is used, use the authorization-attribute level level
command in local user view to set the user privilege level on the device.
•
If a RADIUS or HWTACACS authentication scheme is used, set the user privilege level on the
RADIUS or HWTACACS server.
To configure scheme authentication for modem dial-in users:
Step
1.
Enter system view.
2.
Enter AUX user
interface view.
3.
Enable scheme
authentication.
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode password
set authentication password
[ hash ] { cipher | simple }
password
For more information, see
"Configuring common settings for
modem dial-in
(optional)."
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode scheme
44
Remarks
N/A
N/A
By default, no authentication is
performed for modem dial-in
users.
By default, no password is set.
Optional.
Remarks
N/A
N/A
Whether local, RADIUS, or
HWTACACS authentication is adopted
depends on the configured AAA
scheme.
By default, no authentication is
performed for modem dial-in users.
Advertisement
Table of Contents
