Newtec MDM6000 User Manual page 65

How to Manage the Device
Functional Blocks
Device Management
BBF over IP IN
Encapsulation
S2 Extensions
Demodulator
(Demod Hardware option
Ordering nr. DH-02)
DVB Demodulator
(Demod Hardware option
Ordering nr. DH-01)
Decapsulation
Description
Displays general information on the status of the device.
• Uptime;
• CPU Load.
Functional block that allows to configure and monitor the incoming
traffic.
Displays the configuration, how the incoming traffic is
encapsulated. This can be split up into the following, traffic
classification, traffic shaping, logical channel definition and then
the actual encapsulation of the shaped traffic.
The following encapsulation protocols are possible:
• BBF Encapsulation
– GSE (Generic Stream Encapsulation);
– XPE (Extended Performance Encapsulation)
• TS Encapsulation
– MPE (Multi Protocol Encapsulation)
– ULE (Ultra Lightweight Encapsulation)
Displays the configuration, how the RF signal is taken into the
device. For example:
• Mode selection,
DVB-S2, DVB-S2X or S2
Extensions;
• Input Frequency;
Displays the configuration, how the RF signal is demodulated. For
example:
• Mode selection, DVB-S2;
• Input Frequency;
Displays the configuration, how the encapsulated BBF's are
decapsulated.
• Filter ISI;
• Label;
Newtec Proprietary
Confidentiality: Unrestricted
MDM6000 Satellite Modem
• Symbol Rate;
• Input Level.
• Symbol Rate;
• Input Level.
• Label Filter.
V1.0
/
55 314