Feature Descriptions
14.12.2 BBF Decapsulation
14.12.2.1 BBF Decapsulation ISIs
Define the settings to filter out the required channels.
Parameter
Description
Name
Indicate the ISI that you want to decapsulate.
Verify the used channel name on the sending site.
Enable
Activate the decapsulation of the ISI.
ISI
Enter the ISI value that you want to filter out. This must correspond to the
ISI value defined on the sending site. (In this case on the remote site).
Demod ID
This is the default ID.
Protocol
Here you have the possibility to overrule the default protocol that has been
selected under the general decapsulation settings. Refer to
Decapsulation General Settings on page 251
Newtec Proprietary
Confidentiality: Unrestricted
MDM6000 Satellite Modem
.
V1.0
/
252
314