Table of Contents
Advertisement
Feature Descriptions
Parameter
Name
Enable
PID
ISI
Protocol
Nominal DVB-S2
ModCod
ACM Enable
Description
Enter a logical unique name.
Note: A unique name is proposed by the device.
Enable the creation of PIDs.
This adds a Program Identifier to the transport stream packet that is
being created.
This is needed by the receiver, to filter out this specific program.
Enter the Program Identifier number. This number is added to the
header transport stream. It will be used by the decapsulator on the
receiver site.
Select one of the available ISI names.
The available names are defined under ISIs.
Here you have the possibility to overrule the default protocol that has
been selected under the general encapsulation settings.
Refer to
Encapsulation General Settings on page 223
Select the ModCod to be used (overruled when ACM is
enabled).(overruled when ACM is enabled).
This configuration guideline does not cover ACM.
Newtec Proprietary
Confidentiality: Unrestricted
MDM6000 Satellite Modem
.
242
V1.0
/
314
Advertisement
Table of Contents
