1. Manuals
  2. Brands
  3. Newtec Manuals
  4. Modem
  5. EL470
  6. Reference manual

Newtec EL470 Reference Manual

Ip satellite modem
Hide thumbs Also See for EL470:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Reference Manual
for
EL470 IP Satellite Modem
version 3.1
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EL470 and is the answer not in the manual?

Questions and answers

Related Manuals for Newtec EL470

Summary of Contents for Newtec EL470

  • Page 1 Reference Manual EL470 IP Satellite Modem version 3.1 SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS...
  • Page 2 Reference Manual for EL470 IP Satellite Modem © 2011 Newtec Cy N.V. The material contained in this document is confidential and intended for use only by parties authorised by Newtec Cy N.V. All Rights Reserved. No part of this document may be photocopied, reproduced,...

  • Page 3: About This Manual

    Reference Manual for EL470 IP Satellite Modem About this Manual ABOUT THIS MANUAL This manual provides a detailed overview of the commands used in this device. Here you can find a description of the function of the command, the possible values and structures of the commands and the information you need to be able to enter commands using RMCP or SNMP.

  • Page 4: Related Documentation

    Reference Manual for EL470 IP Satellite Modem Related documentation • EL470 User Manual: this manual gives a general description of the device, its technology and its features. It also explains a number of use cases with step- by-step configuration instructions.
  • Page 5 Software versions Release 8.1 Feedback Newtec Cy N.V. encourages your comments concerning this document. We are committed to providing documentation that meets your needs. Please send any comments by contacting us at documentation@newtec.eu. Please include document and any comment, error found or suggestion for improvement you have regarding this document.

  • Page 6: Table Of Contents

    Reference Manual for EL470 IP Satellite Modem Table of Contents TABLE OF CONTENTS About this Manual....................ii Table of Contents....................v 1 Introduction......................1 Contents of the Document..................1 Searching parameters in this Manual..............1 Parameter Table...................... 2 Introduction......................2 'Normal' Command....................2 Structured Command....................4...
  • Page 7 Reference Manual for EL470 IP Satellite Modem Table of Contents /Modem/Control/Demodulation................99 /Modem/Monitor....................116 /Modem/Monitor/Interfaces..................116 /Modem/Monitor/Modulation................146 /Modem/Monitor/Demodulation................157 Config........................166 Structured Elements with Individual Access............168 Variables only Used via other Commands............194 Test........................235 6 Alarms......................246 Alarm Types......................246 Alarm Commands....................246 Alarm Front Panel Operation................249...

  • Page 8: Table Of Contents

    Introduction 1 INTRODUCTION Contents of the Document This manual is the reference guide of the EL470. It provides a detailed description of the parameters: • Chapter 2 gives an overview of the menu structure. • Chapter 3 describes the User menu parameters.

  • Page 9: Parameter Table

    • Structured Command • Special Command These types of commands are described in detail in the following paragraphs. Request a RMCP and SNMP manual via the Newtec Service Desk tool: > Browse to http://customersupport.newtec.eu > Fill in your Username and Password >...
  • Page 10 Reference Manual for EL470 IP Satellite Modem Introduction Device interface Device interface Device interface Device interface Device interface Device interface (GUI or front panel) (GUI or front panel) (GUI or front panel) (GUI or front panel) (GUI or front panel)

  • Page 11: Structured Command

    ','. These are especially useful to get or set parameters that are closely related. You can read and/or set this structure in the EL470 through one single command. In some cases, structured variables are designed for efficiency, for example to communicate less data.
  • Page 12 Reference Manual for EL470 IP Satellite Modem Introduction The structured commands have an identical list of set and reply arguments. Struct Struct Command Command Reference to variables Reference to variables used by the struct. used by the struct. command command...
  • Page 13 Reference Manual for EL470 IP Satellite Modem Introduction Example The table of description for the 'PRBS counter' Structured Command. Structured Command PRBS counter BecBec Location Demodulator/Monitor Description Reads the current status (PRBS synchronisation), elapsed time since start of the PRBS counter being locked and the number of PRBS errors counted since last lock.

  • Page 14: Special Command

    Reference Manual for EL470 IP Satellite Modem Introduction Special Command Special commands can have different receive and reply arguments. These commands exist in 'set' and 'get' versions. Keep in mind that the command/reply argument lists can differ between the get and the set version.

  • Page 15: Operation

    2 OPERATION Overview In this overview you see the menu structure of variables in the EL470. This is also the menu of the Graphical User Interface (GUI). The main categories in the EL470 device are shown in Table 1 .
  • Page 16 Reference Manual for EL470 IP Satellite Modem Operation EL470 IP Satellite Modem Page Modem Control Common Interfaces Ethernet Modulation Main DVB-S2 Streams BasebandFraming ACM control Demodulation Backup carrier ACM client Monitor Interfaces Ethernet Modulation Packets Frames ACM control Demodulation ModCodStats...
  • Page 17 Reference Manual for EL470 IP Satellite Modem Operation EL470 IP Satellite Modem Page Demodulation Config Structured elements with Individual Access Variables only Used via other Commands Table 2 : Structure of the ‘IP Satellite Modem’ sub-menu operating in normal mode version 3.1...

  • Page 18: User Menu

    Reference Manual for EL470 IP Satellite Modem User Menu 3 USER MENU You can configure the user menu for your own use. In this way, you can create a quick access to those control and monitoring parameters that you need to change or monitor regularly.

  • Page 19: Unit Menu

    Reference Manual for EL470 IP Satellite Modem Unit Menu 4 UNIT MENU In this section of the menu you can control and monitor the operational parameters of the device. The parameters to use the device as test generator or bit error monitor are also explained.
  • Page 20 RMCP versions and adapt their functionality accordingly. RMCP version 2.0 is the enhanced protocol that can be used when • designing new management systems. Contact Newtec to obtain a copy of the separate RMCP user manual. RMCP Access...
  • Page 21 Reference Manual for EL470 IP Satellite Modem Unit Menu Command System uptime System uptime SyDevUptime Values Factory Default String Description length : 0 .. 128 format : any chars /Unit/Setup/Serial port settings Command Serial M&C interface Serial interf. type type...
  • Page 22 Reference Manual for EL470 IP Satellite Modem Unit Menu /Unit/Setup/Ethernet settings Command Device IP address Device IP address SyDevIPAddr Location /Unit/Setup/Ethernet settings Description Configuration of the device IP address. RMCP Access Normal user : RW Command Expert user : RW...
  • Page 23 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Ethernet M&C Transport protocol transport protocol SyEthTransType Location /Unit/Setup/Ethernet settings Description Configuration of the Ethernet interface transport layer. TCP (default) uses acknowledgements to confirm reception of messages while UDP does not.
  • Page 24 Reference Manual for EL470 IP Satellite Modem Unit Menu /Unit/Setup/Display settings Command Display contrast Display contrast SyDevDispContrast Location /Unit/Setup/Display settings Description Configuration command to adjust the display contrast. Use the +/- keys on the front panel to adjust the display contrast..
  • Page 25 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Screensaver message Screensaver message SyScreenSaveMsg Values Factory Default String Description Screensaver length : 0 .. 20 format : any chars /Unit/Setup/SNMP settings Command SNMP read only Read community community SyROCommunity...
  • Page 26 Reference Manual for EL470 IP Satellite Modem Unit Menu Command SNMP trap IP address Trap IP address SyTrapIPAddr SNMP Table ntcDevsMod01SystemEntry Command ntcDevsMod01SyTrapIPAddr 1.3.6.1.4.1.5835.3.1.1.1.69.0.1.[1 .. 2] Values Factory Default String Description 000.000.000.000 length : 0 .. 15 format : \d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}...

  • Page 27: Unit/Control

    Reference Manual for EL470 IP Satellite Modem Unit Menu Special Command WI user WI user WIUsers has to use.Remark: The following access rights are possible: Minimum or read-only access. • Operator or limited access. • Administrator or full access. •...
  • Page 28 Reference Manual for EL470 IP Satellite Modem Unit Menu The device reset is not displayed in the tree view of the Graphical user interface (GUI). This function is located in the Function controls window of the GUI under the tab Reset Device.
  • Page 29 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Generate selected Generate output file output file SyDevGenerate Location /Unit/Control Description With this command certain output files can be generated by selecting the required output type. The generated output file can be retrieved from the \FTP\out directory.
  • Page 30 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Activate system file Activate system file SyDevActivate SNMP Table ntcDevsMod01SystemEntry Command ntcDevsMod01SyDevActivate 1.3.6.1.4.1.5835.3.1.1.1.82.1.1 Values Factory Default Enumeration Value none None Command Interface alarm Interface alarm mask masking mode SyIntAlarmMaskMode Location...
  • Page 31 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Input alarm escallation Input alarm escallat SyInputAlEscallation Values Factory Default Enumeration Value Interface alarm Command Reference clock Reference clock sel. selection SyRefClock Location /Unit/Control Only applicable for modems equipped with a 10 MHz Reference Board.
  • Page 32 Reference Manual for EL470 IP Satellite Modem Unit Menu Command 10 MHz operator 10 MHz oper. adjust frequency adjust SyRef10MTuning units units -50 .. 50 Command 10 MHz ref. factory 10 MHz factory defau default SyRef10MCalib Location /Unit/Control Only applicable for modems equipped with a 10 MHz Reference Board.
  • Page 33 Remark: If the power is enabled, devices that do not tolerate a DC-voltage at their input can be damaged (e.g. non-Newtec outdoor units, spectrum analysers). The use of a blocking capacitor is mandatory in this case. RMCP...
  • Page 34 Description Configuration of the local oscillator frequency of a converter in case a non- Newtec external up- or down-converter is used. This allows the operator to enter the radio frequency directly without having to recalculate the frequency to L-band or IF-band. Use the external spectral inversion menu to indicate if the local oscillator frequency is above or below the radio frequency.
  • Page 35 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Spectrum inv. IFL in Spect. inv. IFL i DmExtLOPolVal SNMP Table ntcDevsMod01DemodulatorEntry Command ntcDevsMod01DmExtLOPolVal 1.3.6.1.4.1.5835.3.1.13.1.44.1.1.[1 .. 2] Values Factory Default Enumeration Value directSpectrum Direct spectrum Inverted spectrum Command Ext. spectrum inv.
  • Page 36 Configuration command to control the 100 MHz outdoor unit reference signal when an outdoor unit conditioning module is used. This 100 MHz reference signal is needed whenever a Newtec outdoor unit is used and is used as a reference for the local oscillator of the up-converter.
  • Page 37 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Group Key Group Key AESGroupKey Command ntcDevsMod01AESGroupKey 1.3.6.1.4.1.5835.3.1.1.1.122.1.1 Values Factory Default String Description FFFFFFFFFFFFFF length : 0 .. 32 FFFFFFFFFFFFFF format : Hexadecimal chars FFFF Command Key Length Key Length...

  • Page 38: Unit/Monitor

    Reference Manual for EL470 IP Satellite Modem Unit Menu /Unit/Monitor Command Device internal Device temperature temperature SyIntTemp Location /Unit/Monitor Description Readout of the internal temperature of the device. The internal temperature must be within +10 and +70° C. Typically, this temperature should be around 40°C (±...
  • Page 39 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Device +12V power +12V power supply supply SyDevPowP12V Location /Unit/Monitor Description Readout of the +12volt power supply monitor. A power supply alarm is triggered when this voltage is outside the range of +10.0 volt and +14.0 volt.
  • Page 40 Reference Manual for EL470 IP Satellite Modem Unit Menu Command 10 MHz reference input 10 MHz input level level measurement SyRef10MLevel Expert user : R SNMP Table ntcDevsMod01SystemEntry Command ntcDevsMod01SyRef10MLevel 1.3.6.1.4.1.5835.3.1.1.1.44.0.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 2950 5000 ..

  • Page 41: Unit/Architecture

    First, there is the architecture information on device level. They can be retrieved via the menu tree:EL470 >> Unit >> Architecture >> General. On device level, the SNMP commands can be used, or RMCP using the command and the address 111.

  • Page 42: Unit/Architecture/Common/M&C Module

    Reference Manual for EL470 IP Satellite Modem Unit Menu Unit/Architecture/Common/M&C module Command Name Page Device Serial Number Device type HW ID HW version HW capability SW ID SW version Device capability Product ID Unit/Architecture/Modem/Interfaces Command Name Page Device Serial Number...

  • Page 43: Unit/Architecture/Modem/Demodulation

    Reference Manual for EL470 IP Satellite Modem Unit Menu Command Name Page Device capability Product Id Unit/Architecture/Modem/Demodulation Command Name Page Device Serial Number Device Type HW ID HW version HW capability SW ID SW version Device capability Product Id Architecture Commands...
  • Page 44 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Product identification Product Id number SyDevProdId1 Location /Unit/Architecture Description Readout of the product identification number. The product identification displays the device type, the sub-type (alphanumeric suffix) together with a short description identifying the product.
  • Page 45 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Bucket version Bucket version SyBucketVersion1 Values Factory Default String Description Vx.xx length : 0 .. 20 format : any chars Command Operating system OS version version SyOSVer1 Location /Unit/Architecture Description Readout of the operating system version and release date.
  • Page 46 Reference Manual for EL470 IP Satellite Modem Unit Menu Command PPC boot version PPC boot version SyPPCVer1 format : any chars Command SNMP daemon version SNMP daemon version SySnmpVer1 Location /Unit/Architecture Description Readout of the SNMP daemon version and release date.
  • Page 47 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Device hardware Hardware capability capability SyDevHwCapab1 Device specific 0 .. 255 Command Device software Software capability capability SyDevSwCapab Location /Unit/Architecture Used as Command(s) Page variable of SyDevCapab Description Readout of the active device software capability number to indicate software variants of the device.
  • Page 48 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Device software Software version version SyDevSwVer11 1.3.6.1.4.1.5835.3.1.1.1.34.0.1 Values Factory Default String Description <press OK> length : 0 .. 40 format : any chars Special Command Device capability Device capability SyDevCapab1...
  • Page 49 Reference Manual for EL470 IP Satellite Modem Unit Menu Command Product number Product number SyDevProdNbr11 Location /Unit/Architecture Description Readout of the product number of the device. RMCP Access Normal user : R Command Expert user : R SNMP Table ntcDevsMod01SystemEntry Command ntcDevsMod01SyDevProdNbr 1.3.6.1.4.1.5835.3.1.1.1.88.1.1...

  • Page 50: Unit/Diagnostics

    A basic diagnostics report: To be used by customers to request all • configuration settings and alarms. A full diagnostics report: To be used by Newtec engineering as a • debugging tool to investigate specific problems detected by the basic diagnostics report.

  • Page 51: Modem

    Reference Manual for EL470 IP Satellite Modem Modem 5 MODEM /Modem/Control /Modem/Control/Common Command Modulation standard Modulation standard MdModStand Location /Modem/Control/Common Description Configuration of the modulation standard that defines the major operating mode of the device. DVB-S2: Compatible with EN302307. •...

  • Page 52: Modem/Control/Interfaces

    Reference Manual for EL470 IP Satellite Modem Modem Command Processing mode Processing mode MdProcMode Transparent Eth(ntS2BBF) -> Air(S2BBF), applicable for DVB-S2. • DVB-S2 Baseband frames received from a Newtec encapsulator forwarded from an Ethernet input to the modulator board and from demodulator back to Ethernet output.
  • Page 53 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Interfaces/Ethernet/Link/Interface Only valid for Eth(IP), Eth(TSoIP), Eth(S2BBF) or Eth(ntS2BBF) processing modes. /Modem/Control/Interfaces/Ethernet/Link/Interface A Command Auto-Negotiation Auto-Negotiation IfEthAutoNegEn Location /Modem/Control/Interfaces/Ethernet/Link/Interface A Description Configuration of auto-negotiation of the Ethernet physical interface. When auto-negotiation is disabled the correct speed must be configured via command IfEthForceSpeed.
  • Page 54 Reference Manual for EL470 IP Satellite Modem Modem Command Speed advertisement Speed advertisement IfEthForceSpeed2 negotiation process. RMCP Access Normal user : no access Command array : [1 .. 2] Expert user : RW SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfEthForceSpeed2 1.3.6.1.4.1.5835.3.1.4.1.232.1.1.[1 .. 2]...
  • Page 55 Reference Manual for EL470 IP Satellite Modem Modem Command Restart Auto- Restart Auto-Negotia Negotiation IfEthAutoNegRestart 1.3.6.1.4.1.5835.3.1.4.1.82.1.1.[1 .. 2] Values Factory Default Enumeration Value idle Restart Idle Command Speed advertisement Speed advertisement IfEthForceSpeed2 Location /Modem/Control/Interfaces/Ethernet/Link/Interface B Description Configuration command to force the speed of the Ethernet physical interface to a given bitrate by changing the advertised speeds in the auto- negotiation process.
  • Page 56 Reference Manual for EL470 IP Satellite Modem Modem Command Eth itf redundancy Eth itf redundancy IfEthIfRedunEnable Enabled: prioritize A Enabled: prioritize B version 3.1 SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS...
  • Page 57 Reference Manual for EL470 IP Satellite Modem Modem Command Itf follows gateway Itf follows gateway IfEthIfRedunFollowGw Location /Modem/Control/Interfaces/Ethernet/Itf redundancy Description Configuration for the interface link selection to choose the active link where the gateway IP address(es) can be reached. When one of the configured IP gateways is not reachable on one of the interfaces, it will make the other interface active.
  • Page 58 Reference Manual for EL470 IP Satellite Modem Modem Command Unit redun virtual MAC Unit redun virtual M IfEthUnitRedunVmac Location /Modem/Control/Interfaces/Ethernet/Unit redundancy Description Configuration command to enable virtual MAC addresses on the Ethernet traffic ports. Units that backup each other should have the same IP addresses and virtual MAC addresses when one goes down.
  • Page 59 Reference Manual for EL470 IP Satellite Modem Modem Command VR-ID Eth A VR-ID Eth A IfEthUnitRedunVridA SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfEthUnitRedunVridA 1.3.6.1.4.1.5835.3.1.4.1.248.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 1 .. 255 Command VR-ID Eth B...
  • Page 60 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Interfaces/Ethernet/IP encap-decap Only valid for Eth (IP) processing modes. Command Enable Ethernet itf Enable Ethernet itf IfEthInputConf Location /Modem/Control/Interfaces/Ethernet/IP encap-decap Description Configuration of the interface to be used on the Ethernet board. When Ethernet interface redundancy is enabled, interface A points to the virtual interface on top of interface A and B.
  • Page 61 Reference Manual for EL470 IP Satellite Modem Modem Command Encapsulation Encapsulation protoc protocol IfEthRxFixedFilter Protocols Location /Modem/Control/Interfaces/Ethernet/IP encap-decap Description Configuration of the encapsulation protocol to use. RMCP Access Normal user : RW Command Expert user : RW SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfEthRxFixedFilterProtocols 1.3.6.1.4.1.5835.3.1.4.1.85.1.1...
  • Page 62 Reference Manual for EL470 IP Satellite Modem Modem Command L2 routing L2 routing IfEnableL2routing SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfEnableL2routing 1.3.6.1.4.1.5835.3.1.4.1.230.1.1 Values Factory Default Enumeration Value enabled Disabled Enabled Command promiscuous mode promiscuous mode IfPromiscFlag Location /Modem/Control/Interfaces/Ethernet/IP encap-decap Description Readout of the promiscuous flag that indicates if the Ethernet interface is receiving packets for all MAC addresses (= promiscuous) or only for its own MAC address (= non-promiscuous).
  • Page 63 Reference Manual for EL470 IP Satellite Modem Modem Command Inband mngt encap stream Inband mngt encap st IfPacketInsStreamId Location /Modem/Control/Interfaces/Ethernet//P encap-decap Description Inband management encapsulation stream id. RMCP Access Normal user : no Command access Expert user : RW SNMP...
  • Page 64 Reference Manual for EL470 IP Satellite Modem Modem Command VLAN type id VLAN type id IfVLANTypeId Location /Modem/Control/Interfaces/Ethernet/ipencap Description This field defines the VLAN type identifier. It can be used to filter on the outer VLAN tag in a QinQ frame (standardized as 0x9100). This device filters on maximum 1 VLAN tag.
  • Page 65 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Interfaces/Ethernet/IP encap-decap/Ethernet Rx routes Structured Command Ethernet receive Ethernet Rx routes routes IfChConfigEthRx Location /Modem/Control/Interfaces/Ethernet/ipencap/Ethernet Rx routes Description Configuration of the routes from the Ethernet interface towards the satellite interface. Packets are captured from the specified VLAN and filtered by the Ethernet MAC address and/or IP address.
  • Page 66 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Demod Rx routes Demod Rx routes IfChConfigEthTx IfChConfigEthTxEnable IfChConfigEthTxISI IfChConfigEthTxPID IfChConfigEthTxAirMac IfChConfigEthTxVlanId IfChConfigEthTxMac /Modem/Control/Interfaces/Ethernet/IP encap-decap/Protocols Only valid for Eth (IP) processing modes. Structured Command ULE Settings ULE Settings IfUleSettings Location...
  • Page 67 Reference Manual for EL470 IP Satellite Modem Modem Structured Command XPE Settings XPE Settings IfGBSSettings Command ntcDevsMod01IfGBSSettings 1.3.6.1.4.1.5835.3.1.4.1.91.1.1 Variables Page IfGBSSettingsDestMac IfGBSSettingsCRC Structured Command GSE Settings GSE Settings IfGSESettings Location /Modem/Control/Interfaces/Ethernet/ipencap/Protocols Description Configuration of GSE encapsulator/decapsulator. To change the values, press the change button. For each variable, a drop down box will appear.
  • Page 68 Reference Manual for EL470 IP Satellite Modem Modem Command QOS on cpuload QOS on cpuload IfQosOnCpuload Location /Modem/Control/Interfaces/Ethernet/IP encap-decap/QOS Description Configuration command to specify if the quality of service mechanism need to be applied when the CPU is highly loaded. Enabling this will lower the maximum throughput.
  • Page 69 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Eth RX QOS rule table Eth RX QOS rule tabl IfEthQosRuleEntry IfEthQosRuleClassif IfEthQosRulePrio /Modem/Control/Interfaces/Ethernet/IP encap-decap/Signalling Command Signalling IP Signalling IP SySigIp Location /Modem/Control/Interfaces/Ethernet/IP encap-decap/Signalling Description Configuration of the signalling IP address. The signalling IP address is used for various control functions such as ACM messaging.
  • Page 70 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Interfaces/Ethernet/IP termination/Network Only valid for the following processing modes: • Eth (TSoIP) • Eth (S2BBFoE) • Eth (ntS2BBFoE) Command Own IP address A Own IP address A BuDecOwnIpaddrA Location /Modem/Control/Interfaces/Ethernet/IP termination/Network Description Configuration of the IP address of Ethernet interface A.
  • Page 71 Reference Manual for EL470 IP Satellite Modem Modem Command Own IP Address B Own IP Address B BuDecOwnIpaddrB 192.168.254.3 length : 0 .. 15 format : \d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3} Command Own netmask B Own netmask B BuDecOwnNetMaskB Location /Modem/Control/Interfaces/Ethernet/IP termination/Network Description Configuration of the network mask of Ethernet interface B.
  • Page 72 Reference Manual for EL470 IP Satellite Modem Modem Command Multicast interface Multicast interface IfEthMcastIf 1.3.6.1.4.1.5835.3.1.4.1.191.1.1 Values Factory Default Enumeration Value none None Interface A Interface B /Modem/Control/Interfaces/Ethernet/IP termination/MPEG over IP Only valid for Eth (TSoIP) processing mode. Command RX Format...
  • Page 73 Reference Manual for EL470 IP Satellite Modem Modem Command RX IP type RX IP type IfMPEGoUDPRXSettings Type 1.3.6.1.4.1.5835.3.1.4.1.149.1.1 Values Factory Default Enumeration Value multicast Multicast Unicast Command RX Profile RX Profile IfMPEGoUDPRXSettings Profile Location /Modem/Control/Interfaces/Ethernet/IP termination/MPEG over IP Description Configuration of the profile of the transport stream over IP traffic.
  • Page 74 Reference Manual for EL470 IP Satellite Modem Modem Command RX UDP port RX UDP port IfMPEGoUDPRXSettings UDPPort Location /Modem/Control/Interfaces/Ethernet/IP termination/MPEG over IP Description Configuration of the UDP port number for MPEG over UDP decapsulation. Remark: This setting applies to the reception of UDP packets.
  • Page 75 Reference Manual for EL470 IP Satellite Modem Modem Command S2BBFoE tx IP S2BBFoE tx IP addres address IfDvbs2BboeTxIp 0.0.0.0 length : 0 .. 15 format : \d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3} Command S2BBFoE tx UDP port S2BBFoE tx UDP port IfDvbs2BboeTxUdpPort Location /Modem/Control/Interfaces/Ethernet/IP termination/S2BBF over IP...
  • Page 76 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Interfaces/Ethernet/IP termination/ntS2BBF over IP Only valid for Eth (ntS2BBFoE) processing mode. Command ntS2BBFoE UDP port ntS2BBFoE UDP port IfDvbs2BbRxUdpPort Location /Modem/Control/Interfaces/Ethernet/IP termination/ntS2BBF over IP Description This field defines the UDP port used for receiving DVB-S2 baseband frames over Ethernet from an external encapsulator (e.g.: AZ810)
  • Page 77 Reference Manual for EL470 IP Satellite Modem Modem Command S2BBFoE tx UDP port S2BBFoE tx UDP port IfDvbs2BboeTxUdpPort Location /Modem/Control/Interfaces/Ethernet/IP termination/ntS2BBF over IP Description Configuration of the UDP port number to which DVB-S2 baseband frames will be transmitted over the Ethernet interface.

  • Page 78: Modem/Control/Modulation

    Reference Manual for EL470 IP Satellite Modem Modem Command Avg coding comp Avg coding comp wind window IfDvbs2BbRxAvgCoding ComprWin Location /Modem/Control/Interfaces/Ethernet/IP termination/ntS2BBF over IP Description This is the number of encapsulation periods over which we calculate the average coding compression. See also IfDvbs2BbRxAvgCodingCompr.
  • Page 79 Reference Manual for EL470 IP Satellite Modem Modem Command FEC-rate and FEC-rate and mod. modulation MoFecMod2 Location /Modem/Control/Modulation/Main Used as Command(s) Page variable of IfStrConfig Only for DVB-S2 mode except for Air(XPE) processing modes. Description Configuration of the FEC-rate and modulation. The selection of the FEC- rate and modulation are coupled and depend on the present modulation standard and capability of the device.
  • Page 80 Reference Manual for EL470 IP Satellite Modem Modem Command FEC-rate and FEC-rate and mod. modulation MoFecMod2 8PSK-3/5 8PSK-2/3 8PSK-3/4 8PSK-5/6 8PSK-8/9 8PSK-9/10 Command Physical Layer Pilot Pilot insertion insertion MoPilots Location /Modem/Control/Modulation/Main Used as Command(s) Page variable of IfStrConfig Only valid for DVB-S2 modes and XPE modes.
  • Page 81 Reference Manual for EL470 IP Satellite Modem Modem Command DVB-S2 FEC-Frame FEC-Frame type type MoFrameType Location /Modem/Control/Modulation/Main Used as Command(s) Page variable of IfStrConfig Only valid for DVB-S2 modes and XPE modes. Description Configuration of the DVB-S2 FEC-frame type. Two FEC-frame types are defined: Normal FEC-frames of 64800 bits or 8100 bytes.
  • Page 82 Reference Manual for EL470 IP Satellite Modem Modem Command Symbol rate Symbol rate MoSymRate Location /Modem/Control/Modulation/Main Description Configuration of the symbol rate. The actual range depends on installed hardware and software capability. RMCP Access Normal user : RW Command Expert user : RW...
  • Page 83 Reference Manual for EL470 IP Satellite Modem Modem Command Gain control mode Gain control mode MoGainCtrlMode Location /Modem/Control/Modulation/Main Description Configuration of the output level gain control mode. The modulator output level accuracy can be controlled statically in the fixed manual gain control mode or by using an automatic gain feedback control loop.
  • Page 84 Reference Manual for EL470 IP Satellite Modem Modem Command TX suppression on TX suppression on de demod unlock MoSuppressionByDemodU nlock Location /UnitFunction/Control/Modulation/Main Description Use this command to decide if the transmission must continue during demod unlock or if it must be suppressed.
  • Page 85 Reference Manual for EL470 IP Satellite Modem Modem Command Modulator board Tx Modulator board Tx MoOutputEnable Location /Modem/Control/Modulation/Main Only applicable for L-band modulators. Description Configuration command to enable or disable the modulator output signal. The transmission is switched-off upon detection of a general device alarm of the modulator board.
  • Page 86 Reference Manual for EL470 IP Satellite Modem Modem Command Carrier modulation Carrier modulation MoCaMod of spectrum polarity. RMCP Access Normal user : no access Command Expert user : RW SNMP Table ntcDevsMod01ModulatorEntry Command ntcDevsMod01MoCaMod 1.3.6.1.4.1.5835.3.1.3.1.7.1.1 Values Factory Default Enumeration Value...
  • Page 87 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Modulation/BasebandFraming Only valid for DVB-S2 and single stream modes. Command DVB-S2 DFL DFL mode encapsulation mode MoDFLMode Location /Modem/Control/Modulation/BasebandFraming Description Configuration of the data field length mode. When operating with non- baseband frame input formats (i.e. a MPEG transport stream input or generic input streams) the raw input stream is encapsulated into DVB-S2 baseband frames.
  • Page 88 Reference Manual for EL470 IP Satellite Modem Modem Command Rx Baseband DFL Rx Baseband DFL MoDFL Location /Modem/Control/Modulation/BasebandFraming Description Configuration of the data field length. This variable specifies the baseband data field length size (in bytes) for encapsulation of user data into DVB-S2 baseband frames.
  • Page 89 Reference Manual for EL470 IP Satellite Modem Modem Command Input Stream Identifier ISI MoISI Location /Modem/Control/Modulation/BasebandFraming Used as Command(s) Page variable of IfStrConfig Description Configuration of the DVB-S2 input stream identifier or ISI which is present in the second byte position of the MATYPE field in the baseband header of a DVB-S2 baseband frame.
  • Page 90 Reference Manual for EL470 IP Satellite Modem Modem Command MIN Modcod MIN Modcod MoAcmCtrlMinModcod Location /Modem/Control/Modulation/ACM control Description Configuration of the lowest modcod that can be used by the ACM controller. This field is used to avoid the use of some modcods that may not be supported by the attached demodulators.
  • Page 91 Reference Manual for EL470 IP Satellite Modem Modem Command MAX Modcod MAX Modcod MoAcmCtrlMaxModcod Location /Modem/Control/Modulation/ACM control Description Configuration of the maximum modcod that can be used by the ACM controller. This field is used to avoid the use of some modcods that may not be supported by the attached demodulators.
  • Page 92 Reference Manual for EL470 IP Satellite Modem Modem Command Comm failure Modcod Comm failure Modcod MoAcmCtrlCommFail Modcod Location /Modem/Control/Modulation/ACM control Description Configuration of the modcod that needs to be selected when the communication with the demodulator fails. RMCP Access Normal user : RW...
  • Page 93 Reference Manual for EL470 IP Satellite Modem Modem Command Min margin Min margin MoAcmCtrlMinMargSpec Location /Modem/Control/Modulation/ACM control Description Configuration of the margin specification for the ACM controller before going to a lower modcod. Different margin specifications for different modcods can be specified in the following way: 1-10:0.50 11-28:1.0 which means that for modcods 1 to 10 a difference of 0.5 dB is needed between...
  • Page 94 Reference Manual for EL470 IP Satellite Modem Modem Command Distortion Distortion MoAcmCtrlDistortSpec 1.3.6.1.4.1.5835.3.1.3.1.135.1.1 Values Factory Default String Description length : 0 .. 30 format : any chars Command ACM monitoring only ACM monitoring only MoAcmCtrlMonitorOnly Location /Modem/Control/Modulation/ACM control Description Configuration command to enable a special ACM monitoring mode. When this field is enabled, the ACM controller will only monitor the system and not actually change the modcod.
  • Page 95 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Modulation/ACM control/Demod table Structured Command ACM demodulator Demod table supervision table MoAcmDmSupvEntry Location /Modem/Control/Modulation/ACM control/Demod table Description Configuration of the demodulator supervision parameters for the ACM controller. The demodulator supervision parameters provides the mapping between modulator and demodulator based on the demodulator IP address and the DVB-S2 stream identifier.
  • Page 96 Reference Manual for EL470 IP Satellite Modem Modem Command Tx spectrum inversion Tx spectrum inversio MoSpectInv Location /Modem/Control/Modulation/PHY Description Configuration command to enable or disable spectrum inversion. The spectrum at IFL and at RF is coupled by the installed up-converter module and can be deduced from the frequency conversion formula.
  • Page 97 Reference Manual for EL470 IP Satellite Modem Modem Command Nonlinear predistortion Nonlinear pred MoNonLinPredMode Location /Modem/Control/Modulation/PHY This predistortion feature is optional and password upgradeable. Description Configuration command to enable or disable the non-linear pre-distortion function. Non-linear pre-distortion can substantially improve the overall performance of the satellite link.
  • Page 98 Reference Manual for EL470 IP Satellite Modem Modem Command Amplitude slope Slope equaliser equaliser MoAmplEq Location /Modem/Control/Modulation/PHY Description Configuration of the amplitude slope equaliser. An amplitude slope in the up-converter or in the high power amplifier can be compensated by using this equaliser which has a maximum range of ±...
  • Page 99 Reference Manual for EL470 IP Satellite Modem Modem Command Monitoring output Monitor output mode mode MoMonOutputMode Command ntcDevsMod01MoMonOutputMode 1.3.6.1.4.1.5835.3.1.3.1.52.1.1 Values Factory Default Enumeration Value always_on Always on Follow Tx Command Occupied bandwidth Occupied bandwidth MoOccBw Location /Modem/Control/Modulation/PHY Description Readout of the occupied bandwidth or readout of the -26 dB bandwidth of the signal.
  • Page 100 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Control/Modulation/AES Command Global Encryption Global Encryption MoAESEncryptionCtrl Location /Modem/Control/Modulation/AES Description Used to select if the Global Encryption key is used for all ISI or ISI specific encryption settings are used. global: AES encryption enabled with global key (one key for all •...
  • Page 101 Reference Manual for EL470 IP Satellite Modem Modem Command Global Key Parity Global Key Parity MoAESKeyParityGlob Location /Modem/Control/Modulation/AES/Global Description This variable is used for the Global key parity selection (odd/even) for each ISI odd: use Odd key • even: use Even key •...
  • Page 102 Reference Manual for EL470 IP Satellite Modem Modem Command Global Encypted Odd Global Encypted Odd MoAESEncOddGlobalKey Location /Modem/Control/Modulation/AES/Global Description This is the Global ODD encrypted key entered by the user and decrypted with the group key. The key can be either 64bits or 128bits long, depending on the key length setting.If 64bit length is selected then the key...
  • Page 103 Reference Manual for EL470 IP Satellite Modem Modem Command Global Odd Key Global Odd Key MoAESOddGlobalKey Location /Modem/Control/Modulation/AES/Global Description This is the AES Global ODD key (non-encrypted) entered by the user. This can be either 64bits or 128bits long, depending on the key length setting.The value is entered as a hexadecimal value:...
  • Page 104 Reference Manual for EL470 IP Satellite Modem Modem Command ISI for Key Id ISI for Key Id MoAESKeyISI Values Factory Default String Description length : 0 .. 2 format : Hexadecimal chars Command Key Parity Id Key Parity Id MoAESKeyParityISI...
  • Page 105 Reference Manual for EL470 IP Satellite Modem Modem Command Encrypted Odd Key Encrypted Odd Key MoAESEncOddKeyISI Location /Modem/Control/Modulation/AES/Keys 1-4 Description This is the ODD encrypted key entered by the user and decrypted with the group key. The key can be either 64bits or 128bits long, depending on the key length setting.If 64bit length is selected then the key has to be...

  • Page 106: Modem/Control/Demodulation

    Reference Manual for EL470 IP Satellite Modem Modem Command Odd Key Odd Key MoAESOddKeyISI Location /Modem/Control/Modulation/AES/Keys 1-4 Description This is the AES ODD key (non-encrypted) entered by the user. This can be either 64bits or 128bits long, depending on the key length setting.The value is entered as a hexadecimal value:...
  • Page 107 Reference Manual for EL470 IP Satellite Modem Modem Command DVB-S2 Coding and DVB-S2 mode Modulation mode DmACMMode interface board. If the encapsulator does not generate enough DVB- S2 baseband frames, the modulator board will stuff the stream with dummy physical layer frames.
  • Page 108 Reference Manual for EL470 IP Satellite Modem Modem Command Interface rate Interface rate DmIntRate Location /Modem/Control/Demodulation Description Configuration of the nominal interface rate. When automatic detection (ACM or auto-CCM) of FEC and modulation mode is enabled, the operator can only enter a specific symbol rate while the interface rate will indicate auto.
  • Page 109 Reference Manual for EL470 IP Satellite Modem Modem Command FEC-rate and FEC-rate and mod. modulation DmFECDemod2 Location /Modem/Control/Demodulation Description Configuration of the forward error correction coding & modulation. This variable is only visible in constant coding and modulation mode. RMCP...
  • Page 110 Reference Manual for EL470 IP Satellite Modem Modem Command Actual roll-off factor Actual roll-off fact DmExcBWStat Location /Modem/Monitor/Demodulation Description Readout of the actual used roll-off factor in cases when the automatic roll- off detection is used. RMCP Access Normal user : R...
  • Page 111 Reference Manual for EL470 IP Satellite Modem Modem Command DVB-S2 Physical Layer Pilots Pilots DmPilots Command DVB-S2 FEC-Frame FEC-Frame type type DmFrameType Location /Modem/Control/Demodulation Description This variable is only visible in CCM mode and allows to configure the DVB-S2 forward error correction (FEC) frame type : Normal: FEC-frames of 64800 bits or 8100 bytes.
  • Page 112 Reference Manual for EL470 IP Satellite Modem Modem Command Rx spectrum inversion Rx spectrum inversion DmSpecInv Location /Modem/Control/Demodulation Description Configuration command for the received spectrum. The selection of the auto mode allows the device to solve the spectrum ambiguity when the status of the received spectrum is unknown.
  • Page 113 Reference Manual for EL470 IP Satellite Modem Modem Command Output clock selection Output clock sel. IfOutputClock Location /Modem/Control/Demodulation Description Configuration of the clock for the data output at the interface. This is also the output clock for the de-framer buffer.
  • Page 114 Reference Manual for EL470 IP Satellite Modem Modem Command Roll-off factor Roll-off factor DmExcBW Command PID filtering PID filtering DmPidFilteringControl Location /Modem/Control/Demodulation Description Enable or disable PID filtering. RMCP Access Normal user : no access Command Expert user : RW...
  • Page 115 Reference Manual for EL470 IP Satellite Modem Modem Command Backup symbol rate Backup symbol rate % DmBuSynRate SNMP Table ntcDevsMod01DemodulatorExtEntry Command ntcDevsMod01DmBuSynRate 1.3.6.1.4.1.5835.3.1.13000.1.18.1.1.[1 .. 2] Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) Mbaud baud 27.500000 -1e+38 .. 1e+38...
  • Page 116 Reference Manual for EL470 IP Satellite Modem Modem Command Carrier switch count Carrier switch count DmBuSwitchCnt SNMP Table ntcDevsMod01DemodulatorEntry Command ntcDevsMod01DmBuSwitchCnt 1.3.6.1.4.1.5835.3.1.13.1.147.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) events events 0 .. 4294967295 /Modem/Control/Demodulation/ACM client...
  • Page 117 Reference Manual for EL470 IP Satellite Modem Modem Command Global Encryption Global Encryption DmAESEncryptionCtrl Command Encryption Global Encryption Global DmAESEnableEncGlobal Location /Modem/Control/Demodulation/AES/Global Description This method is used to enable/disable Global AES encryption/decryption. If encryption is disabled, then the Global key is disabled (ignored) If encryption is enabled, then the encryption is via the global settings.
  • Page 118 Reference Manual for EL470 IP Satellite Modem Modem Command Global Encypted Even Global Encypted Even DmAESEncEvenGlobalKey Location /Modem /Control/Demodulation/AES/Global Description This is the Global EVEN encrypted key entered by the user and decrypted with the group key. The key can be either 64bits or 128bits long, depending on the key length setting.If 64bit length is selected then the key...
  • Page 119 Reference Manual for EL470 IP Satellite Modem Modem Command Global Even Key Global Even Key DmAESEvenGlobalKey Location /Modem/Control/Demodulation/AES/Global Description This is the AES Global EVEN key (non-encrypted) entered by the user. This can be either 64bits or 128bits long, depending on the key length setting.The value is entered as a hexadecimal value:...
  • Page 120 Reference Manual for EL470 IP Satellite Modem Modem Command Encryption Id Encryption Id DmAESEnableEncISI Command ntcDevsMod01DmAESEnableEncISI 1.3.6.1.4.1.5835.3.1.13000.1.8.1.1.[1 .. 4] Values Factory Default Enumeration Value Command ISI for Key Id ISI for Key Id DmAESKeyISI Location /Modem/Control/Demodulation/AES/Keys 1-4 Description This method is used to set/map the ISI to a encryption/decryption key.
  • Page 121 Reference Manual for EL470 IP Satellite Modem Modem Command Encrypted Even Key Encrypted Even Key % DmAESEncEvenKeyISI Location /Modem/Control/Demodulation/AES/Keys 1-4 Description This is the EVEN encrypted key entered by the user and decrypted with the group key. The key can be either 64bits or 128bits long, depending on the key length setting.If 64bit length is selected then the key has to be...
  • Page 122 Reference Manual for EL470 IP Satellite Modem Modem Command Even Key Even Key DmAESEvenKeyISI Location /Modem/Control/Demodulation/AES/Keys 1-4 Description This is the AES EVEN key (non-encrypted) entered by the user. This can be either 64bits or 128bits long, depending on the key length setting.The value is entered as a hexadecimal value:...

  • Page 123: Modem/Monitor

    Reference Manual for EL470 IP Satellite Modem Modem /Modem/Monitor /Modem/Monitor/Interfaces /Modem/Monitor/Interfaces/Ethernet Only valid for the following modes: • Eth(IP) • Eth(S2BBFoE) • Eth(ntS2BBFoE) Command Unit redundancy state Unit redundancy stat SyUnitRedunOperState Location /Modem/Monitor/Interfaces/Ethernet Description This variable indicates whether the unit is active or standby in a redundant configuration.
  • Page 124 Reference Manual for EL470 IP Satellite Modem Modem Command Phy Status A Phy Status A IfItfaStatus Location /Modem/Monitor/Interfaces/Ethernet Description Human readable status of Ethernet physical status of interface A. RMCP Access Normal user : R Command Expert user : R...
  • Page 125 Reference Manual for EL470 IP Satellite Modem Modem Command #Eth RX #Eth RX IfEthStatsRXPackets Location /Modem/Monitor/Interfaces/Ethernet Description Readout of the number of Ethernet packets that are received at the input. RMCP Access Normal user : R Command Expert user : R...
  • Page 126 Reference Manual for EL470 IP Satellite Modem Modem Command #Proxy ARP Resp #Proxy ARP Resp IfProxyARPRespCount Location /Modem/Monitor/Interfaces/Ethernet Description Readout of the number of ARP requests that has been answered by the proxy ARP agent. RMCP Access Normal user : R...
  • Page 127 Reference Manual for EL470 IP Satellite Modem Modem Command Reset Ethernet Reset Ethernet Count Counters IfEthStatsReset Values Factory Default Enumeration Value never Each period (5 s) Never Once Command Last config error Last config error IfGbeConfigError Location /Modem/Monitor/Interfaces/Ethernet Applicable for the whole unit and not only for the Ethernet interface.
  • Page 128 Reference Manual for EL470 IP Satellite Modem Modem Command #Software errors #Software errors IfGbeSwErrCount Location /Modem/Monitor/Interfaces/Ethernet Applicable for the whole unit and not only for the Ethernet interface. Description Readout of the number of software errors encountered on this system. A fatal error inside the counter survives a soft reset.
  • Page 129 Reference Manual for EL470 IP Satellite Modem Modem Structured Command BB TX Eth queue BB TX Eth queue stat status IfBbTxEthqStats Location /Modem/Monitor/Interfaces/Ethernet Only valid for DVB-S2 modes. Description Readout of the baseband TX Ethernet queue status. This queue contains the frames that travel from the Ethernet interface to the baseband interface.
  • Page 130 Reference Manual for EL470 IP Satellite Modem Modem Command BB TX Interface rate BB TX Interface rate IfBBTXInfRate Location /Modem/Monitor/Interfaces/Ethernet Only valid for DVB-S2 modes. Description Readout of the actual interface rate on the interface towards the modulator. RMCP Access...
  • Page 131 Reference Manual for EL470 IP Satellite Modem Modem Command BB TX Estim output BB TX Estim output r rate IfBBTXEstimOutpRate 0 .. 4294967295 Command BB TX DVB-S2 filling BB TX DVB-S2 filling level IfBBTXDvbs2FillingLevel Location /Modem/Monitor/Interfaces/Ethernet Only valid for DVB-S2 modes.
  • Page 132 Reference Manual for EL470 IP Satellite Modem Modem Command BB RX Channel BB RX Channel Dro Dropped IfBBRXChannelDrop Location /Modem/Monitor/Interfaces/Ethernet Description Readout of the number of frames dropped during reception from a channel queue inside FPGA. Frames are dropped when the reception buffer risks overflow.
  • Page 133 Reference Manual for EL470 IP Satellite Modem Modem Command Action Action IfPacketLogAction Count Rx to packet mon Command Filter Filter IfPacketLogFiltPat Location /Modem/Monitor/Interfaces/Ethernet/Packet Mon Description Configuration of the packet log filter. Only packets that match this filter are logged. This filter exists of a sequence of criteria that are combined as a logical AND.
  • Page 134 Reference Manual for EL470 IP Satellite Modem Modem Command Reason Reason IfGbePacketLogReason Location /Modem/Monitor/Interfaces/Ethernet/Packet Mon Description Readout of the string that stores the reason for which the packet in the log buffer was logged. The can for instance display the error cause for which the packet has been logged.
  • Page 135 Reference Manual for EL470 IP Satellite Modem Modem Command Probe Probe IfPacketGenProbe 1.3.6.1.4.1.5835.3.1.4.1.218.1.1 Values Factory Default Enumeration Value ethRxIf Eth RX interface Command Packet format Packet format IfPacketGenFormat Location /Modem/Monitor/Interfaces/Ethernet/Packet Gen Description Configuration of the packet generator format. The packet generator is a UDP packet generator that is compatible with iPerf software in UDP mode.
  • Page 136 Reference Manual for EL470 IP Satellite Modem Modem Command Bitrate Bitrate IfPacketGenBitRate Location /Modem/Monitor/Interfaces/Ethernet/Packet Gen Description Configuration of the bitrate for the packet generator. RMCP Access Normal user : no Command access Expert user : RW SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfPacketGenBitRate 1.3.6.1.4.1.5835.3.1.4.1.215.1.1...
  • Page 137 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Monitor/Interfaces/Ethernet/IP termination/MPEG over IP Statistics Only valid for mode Eth (TSoIP). Command Statistics Counters Statistics Counters Mode IfMPEGoUDPStatsReset Location /Modem/Monitor/Interfaces/Ethernet/IP termination/MPEG over IP Statistics Description Configuration command to specify when the MPEG over UDP statistics counters are reset internally.
  • Page 138 Reference Manual for EL470 IP Satellite Modem Modem Structured Command MPEG over UDP Stats MPEG over UDP Stats IfMPEGoUDPStats IfMPEGoUDPStatsTXMpegDrop IfMPEGoUDPStatsTXPopTimeouts IfMPEGoUDPStatsTXMtuPackets IfMPEGoUDPStatsTXMtuBytes IfMPEGoUDPStatsTXMtuRate IfMPEGoUDPStatsTXPushTimeouts Command RX RTP Sync Src RX RTP Sync Src IfRTPStatsRXSyncSrc Location /Modem/Monitor/Interfaces/Ethernet/IP termination/MPEG over IP...
  • Page 139 Reference Manual for EL470 IP Satellite Modem Modem Command RX RTP Dropped RX RTP Dropped IfRTPStatsRXDrop Location /Modem/Monitor/Interfaces/Ethernet/IP termination/MPEG over IP Statistics Description Readout of the number of transport stream frames dropped during packet reordering. This is possible if a transport stream frame is received out of the reordering window.
  • Page 140 Reference Manual for EL470 IP Satellite Modem Modem Command RX RTP TS tracking RX RTP TS tracking IfRTPStatsRXMaxTSCount Location /Modem/Monitor/Interfaces/Ethernet/IP termination/MPEG over IP Statistics Description Readout of the last tracking number that is internally assigned to a transport stream packet to perform reordering of transport stream packets in a real time protocol stream.
  • Page 141 Reference Manual for EL470 IP Satellite Modem Modem Command Avg coding Avg coding compressi compression IfDvbs2BbRxAvgCoding Compr Command ntcDevsMod01IfDvbs2BbRxAvgCodingCompr 1.3.6.1.4.1.5835.3.1.4.1.201.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) bytes/sym bytes/sym -1e+38 .. 1e+38 Structured Command IP volume req stats...
  • Page 142 Reference Manual for EL470 IP Satellite Modem Modem Structured Command ntS2BBFoE current current statistics statistics IfDvbs2BboerxCurStats Location /Modem/Monitor/Interfaces/Ethernet/IP termination/ntS2BBFoE Rx Statistics Description Statistics (current interval) for the ntS2BBFoE receiver instances RMCP Access Normal user : no access Command array : [1 .. 4]...
  • Page 143 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Monitor/Interfaces/Ethernet/IP termination/S2BBFoE Rx Statistics Only valid for mode Eth (ntS2BBFoE). Structured Command S2BBFoE RX counters S2BBFoE RX counters IfS2BBFoERxCounters Location /Modem/Monitor/Interfaces/Ethernet/IP termination/S2BBFoE Rx Statistics Only valid for DVB-S2 modes. Description Readout of the DVB-S2 baseband frames over Ethernet RX counters. The...
  • Page 144 Reference Manual for EL470 IP Satellite Modem Modem Command Statistics Counters Statistics Counters Mode IfUleStatsReset Values Factory Default Enumeration Value never Reset each period (5 s) Never Reset on Get Structured Command ULE Stats ULE Stats IfUleStats Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/ULE Statistics Description Readout of the ULE encapsulation statistics.
  • Page 145 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/MPE Statistics Only valid for the following modes: • Eth(IP) • Air(TS) Command Statistics Counters Statistics Counters Mode IfMpeStatsReset Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/MPE Statistics Description Configuration command to specify when the MPE statistics counters are reset internally.
  • Page 146 Reference Manual for EL470 IP Satellite Modem Modem /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/Datapiping Statistics Only valid for the following modes: • Eth(IP) • Air(TS) Command Statistics Counters Statistics Counters Mode IfDPStatsReset Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/Datapiping Statistics Description Command to configure when the datapiping statistics counters are reset internally.
  • Page 147 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Datapiping Stats Datapiping Stats IfDPStats IfDPStatsRXMtuBytes IfDPStatsRXMtuRate IfDPStatsRXMpegPackets IfDPStatsRXPopTimeouts IfDPStatsRXPushTimeouts IfDPStatsRXIdle /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/XPE Statistics Command Statistics Counters Statistics Counters Mode IfGBSStatsReset Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/XPE Statistics Description Configuration command to specify when the XPE statistics counters are...
  • Page 148 Reference Manual for EL470 IP Satellite Modem Modem Structured Command XPE Stats XPE Stats IfGBSStats IfGBSStatsTXPushTimeouts IfGBSStatsRXBBFrames IfGBSStatsRXBBBytes IfGBSStatsRXPopTimeouts IfGBSStatsRXCRCErrors IfGBSStatsRXDropped IfGBSStatsRXEthPackets IfGBSStatsRXEthBytes IfGBSStatsRXEthRate IfGBSStatsRXPushTimeouts /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/GSE Statistics Command Statistics Counters Statistics Counters Mode IfGSEStatsReset Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/GSE Statistics Description Determine when the GSE statistics counters are reset internally.
  • Page 149 Reference Manual for EL470 IP Satellite Modem Modem Structured Command GSE Stats GSE Stats IfGSEStats IfGSEStatsTXEthRate IfGSEStatsTXPopTimeouts IfGSEStatsTXBBFrames IfGSEStatsTXBBBytes IfGSEStatsTXPushTimeouts IfGSEStatsTXFragmented IfGSEStatsRXBBFrames IfGSEStatsRXBBBytes IfGSEStatsRXPopTimeouts IfGSEStatsRXCRCErrors IfGSEStatsRXDropped IfGSEStatsRXEthPackets IfGSEStatsRXEthBytes IfGSEStatsRXEthRate IfGSEStatsRXPushTimeouts IfGSEStatsRXFragmented Command Decapsulated Decapsulated MODCOD MODCOD DmDecapModcodStatGSE Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Protocols/GSE Statistics...
  • Page 150 Reference Manual for EL470 IP Satellite Modem Modem Command Decapsulated Decapsulated MODCOD MODCOD DmDecapModcodStatGSE 32APSK-4/5 32APSK-5/6 32APSK-8/9 32APSK-9/10 8PSK-3/5 8PSK-2/3 8PSK-3/4 8PSK-5/6 8PSK-6/7 8PSK-7/8 8PSK-8/9 8PSK-9/10 /Modem/Monitor/Interfaces/Ethernet/ipencap/VLAN Statistics Structured Command Ethernet kernel Ethernet kernel stat statistics IfVLANStats Location /Modem/Monitor/Interfaces/Ethernet/ipencap/VLAN Statistics Description Readout of the Ethernet kernel statistics per VLAN per Interface.
  • Page 151 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Eth RX QOS statistics Eth RX QOS statistic IfQosStatsEntry Location /Modem/Monitor/Interfaces/Ethernet/ipencap/QOS Statistics Description Readout of the Ethernet RX quality of service statistics per quality of service class. RMCP Access Normal user : R Command array : [1 ..
  • Page 152 Reference Manual for EL470 IP Satellite Modem Modem Command ACM rt sig rxed ACM rt sig rxed IfAcmRtSigRxed Location /Modem/Monitor/Interfaces/Ethernet/ipencap/Signalling Description Number of ACM return signalling packets received. RMCP Access Normal user : no Command access Expert user : R...

  • Page 153: Modem/Monitor/Modulation

    Reference Manual for EL470 IP Satellite Modem Modem /Modem/Monitor/Modulation Command Monitor output Monitor output freq. frequency MoMonOutputFreq Location /Modem/Monitor/Modulation Description Readout of the modulator L-band monitoring output frequency. RMCP Access Normal user : R Command Expert user : R SNMP...
  • Page 154 Reference Manual for EL470 IP Satellite Modem Modem Command Estimated input bitrate Estim input bitrate InpRateEstim Location /Modem/Monitor/Modulation Description Readout of the estimated input bitrate. The concentrator provides an estimate of the input bitrate on every input channel in order to help the operator in determining a suitable output bitrate.
  • Page 155 Reference Manual for EL470 IP Satellite Modem Modem Command Buffer contents Buffer contents MoBufCont Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 0 .. 100 Command Input buffer size Input buffer size MoBufSize Location /Modem/Monitor/Modulation Description Readout of the physical size of the FIFO buffer between the interface and the modulator part.
  • Page 156 Reference Manual for EL470 IP Satellite Modem Modem Command Transmit clock offset Tx clock offset MoTxOffs Command ntcDevsMod01MoTxOffs 1.3.6.1.4.1.5835.3.1.3.1.36.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) -500 .. 500 Command Modulator clock phase Phase error deviation...
  • Page 157 Reference Manual for EL470 IP Satellite Modem Modem Command clock loop state clock loop state MoClkLoopState Location /Modem/Monitor/Modulation Description Readout of the state of the clock tracking loop on the modulator board. RMCP Access Normal user : no access Command...
  • Page 158 Reference Manual for EL470 IP Satellite Modem Modem Command Gain control state Gain control state MoGainCtrlState Command ntcDevsMod01MoGainCtrlState 1.3.6.1.4.1.5835.3.1.3.1.13.1.1 Values Factory Default Enumeration Value Settling Command Tx On Tx On MoTxStatus Location /Modem/Monitor/Modulation Description Readout of the current transmit status. In case of a modulator, this status indication is used to drive the Tx On LED.
  • Page 159 Reference Manual for EL470 IP Satellite Modem Modem Command Input packetrate Input packetrate MoInpPacketRate Location /Modem/Monitor/Modulation/Packets Description Readout of the estimated input packet rate expressed in packets per second. RMCP Access Normal user : R Command Expert user : R...
  • Page 160 Reference Manual for EL470 IP Satellite Modem Modem Command Packet counters reset Packet counters rst MoCntRst Location /Modem/Monitor/Modulation/Packets Description Command to reset the packet counters. Click on "all" to reset the statistics counter described in the tables. RMCP Access Normal user : no access...
  • Page 161 Reference Manual for EL470 IP Satellite Modem Modem Command Dummy Physical Layer Dummy PL count frame-count MoDummyPLCnt Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 0 .. 4294967295 Command Physical layer PL efficiency efficiency MoPLEfficiency Location /Modem/Monitor/Modulation/Frames Description Readout of the physical layer efficiency of the DVB-S2 modulator.
  • Page 162 Reference Manual for EL470 IP Satellite Modem Modem Command Short frames Short frames MoBBShortFrameRatio Command ntcDevsMod01MoBBShortFrameRatio 1.3.6.1.4.1.5835.3.1.3.1.57.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 0 .. 100 /Modem/Monitor/Modulation/ACM control Command ACM status ACM status MoAcmDiagLog Location...
  • Page 163 Reference Manual for EL470 IP Satellite Modem Modem Structured Command ACM demodulator Demod table monitoring table MoMonAcmDmSupvEntry Command ntcDevsMod01MoMonAcmDmSupvEntry 1.3.6.1.4.1.5835.3.1.3.1.159.1.1.[1 .. 10] Variables Page MoMonAcmDmSupvIp MoMonAcmDmSupvStrid MoMonAcmDmSupvEsno MoMonAcmDmSupvModcod MoMonAcmDmSupvNumRx MoMonAcmDmSupvNumTo MoMonAcmDmSupvNumCto Structured Command ACM stream Stream table monitoring table MoMonAcmStreamEntry...

  • Page 164: Modem/Monitor/Demodulation

    Reference Manual for EL470 IP Satellite Modem Modem Command ACM history logs ACM history logs yes yesterday MoAcmDemodLogYestrd Location /Modem/Monitor/Modulation/ACM control Description Readout of the history ACM controller logs of yesterday. RMCP Access Normal user : R Command Expert user : R...
  • Page 165 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Input level Input level DmMeasAGCCoStruct Variables Page DmMeasAGCCoSat DmMeasAGCCo Structured Command Eb/No estimation Eb/No estimation DmMeasEbNoStruct Location /Modem/Monitor/Demodulation Description Readout of the DVB-S demodulator channel Eb/No estimation. This Eb/No estimation is based on a symbol noise estimation. This estimation is calculated on all symbols, but is not very accurate (+/- 1dB).
  • Page 166 Reference Manual for EL470 IP Satellite Modem Modem Command Carrier frequency Carrier freq. offset offset DmMeasCarOff Command ntcDevsMod01DmMeasCarOff 1.3.6.1.4.1.5835.3.1.13.1.17.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 13.200 -1e+38 .. 1e+38 Command Symbol rate offset Symbol rate offset...
  • Page 167 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Header Es/No Header Es/No estimat estimation DmMeasEsNoStruct Location /Modem/Monitor/Demodulation Description This command reads out the concatenation of DmMeasEsNoSat and DmMeasEsNo. All DVB-S2 demodulators have an integrated Es/No estimator. Their Es/No estimation is made on the physical layer header symbols.
  • Page 168 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Link Margin Estimate Link Margin Estimate DmEstLinMarStruct 1.3.6.1.4.1.5835.3.1.13.1.75.1.1 Variables Page DmEstLinMarSat DmEstLinMar Command FEC-frame type detect Frame type DmFrameTypeStat Location /Modem/Monitor/Demodulation Description Reads out of the detected DVB-S2 FEC-frame type.
  • Page 169 Reference Manual for EL470 IP Satellite Modem Modem Command Actual FEC-rate and Actual FEC-rate and modulation DmFECDemodStat QPSK-3/5 QPSK-4/5 QPSK-8/9 QPSK-9/10 16APSK-2/3 16APSK-3/4 16APSK-4/5 16APSK-5/6 16APSK-8/9 16APSK-9/10 32APSK-3/4 32APSK-4/5 32APSK-5/6 32APSK-8/9 32APSK-9/10 16QAM modulation -- no FEC (Skyplex only) 16 QAM modulation -- rate 1/2 * 188/204...
  • Page 170 Reference Manual for EL470 IP Satellite Modem Modem Structured Command Demodulator S2 Demodulator S2 stati statistics DmModCodStatStruct DmModCodStatPilots DmModCodStatFrameCnt DmModCodStatUncorCnt DmModCodStatSat DmModCodStatChQEst DmModCodStatChCDSat DmModCodStatChCD DmModCodStatChDistQEFSat DmModCodStatChDistQEF /Modem/Monitor/Demodulation/ACM client Command ACM poll ACM poll DmAcmClientPoll Location /Modem/Monitor/Demodulation/ACM client Description Readout of the latest ACM client poll message, that was received via the signalling channel.
  • Page 171 Reference Manual for EL470 IP Satellite Modem Modem Command ACM feedback ACM feedback DmAcmClientFeedback Location /Modem/Monitor/Demodulation/ACM client Description Readout of the latest ACM client feedback string sent to the ACM controller. RMCP Access Normal user : no access Command Expert user : R...
  • Page 172 Reference Manual for EL470 IP Satellite Modem Modem Command ACM logs today ACM logs today DmAcmClientLogToday length : 0 .. 120 format : any chars Command ACM logs yesterday ACM logs yesterday DmAcmClientLogYesterday Location /Modem/Monitor/Demodulation/ACM client Description Readout of the ACM client log-file of yesterday.

  • Page 173: Config

    Reference Manual for EL470 IP Satellite Modem Modem Config In the configuration menu you can save and load up to 48 different operational configurations in permanent memory. You can define a configuration as the group of all device configuration parameters that can be set in the IP Satellite Modem.
  • Page 174 Reference Manual for EL470 IP Satellite Modem Modem Special Command Save Save SyConfigSaveFlash Location /Config Description Configuration command to save a configuration to permanent memory. Up to 48 different configurations can be saved. Remember that the default boot configuration has to be saved in configuration 0 since this is the one that is loaded when the device (re)-boots.

  • Page 175: Structured Elements With Individual Access

    Reference Manual for EL470 IP Satellite Modem Modem Structured Elements with Individual Access Command Eb/No level clipping Eb/No lvl clipping info DmMeasEbNoSat Used as Command(s) Page variable of DmMeasEbNoStruct Description Readout of the Eb/No level clipping information. When reading saturated values for the Eb/No estimation, the clipping information will identify the direction of saturation or return equal if the value is within range.
  • Page 176 Reference Manual for EL470 IP Satellite Modem Modem Command FEC-rate and FEC-rate and mod. modulation DmModCodStatModCod SNMP Table ntcDevsMod01DemodulatorEntry Command ntcDevsMod01DmModCodStatModCod 1.3.6.1.4.1.5835.3.1.13.1.69.1.1 Values Factory Enumeration Value Default Dummy PLFRAMES QPSK-3/4 QPSK modulation -- no FEC (Skyplex only) QPSK modulation -- rate 1/2 * 188/204...
  • Page 177 Reference Manual for EL470 IP Satellite Modem Modem Command Frame type Frame type DmModCodStatFrameType Used as Command(s) Page variable of DmModCodStatStruct Description Readout of the DVB-S2 forward error correction (FEC) frame type detected after reception: Normal: FEC-frames of 64800 bits or 8100 bytes.
  • Page 178 Reference Manual for EL470 IP Satellite Modem Modem Command BB frame count BB frame count DmModCodStatFrameCnt Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) frames frames 0 .. 65535 Command Uncorrectable frame Uncor frame count count DmModCodStatUncorCnt...
  • Page 179 Reference Manual for EL470 IP Satellite Modem Modem Command Channel quality est Channel quality est DmModCodStatChQEst Used as Command(s) Page variable of DmModCodStatStruct Description Readout of the channel quality estimate. The channel quality estimation shows the Es/No minus the link margin estimation and is a measure for...
  • Page 180 Reference Manual for EL470 IP Satellite Modem Modem Command C/D est C/D est DmModCodStatChCD 1.3.6.1.4.1.5835.3.1.13.1.76.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) -999.9 .. 999.9 Command Link margin clipping Link margin clipping info DmModCodStatChDist QEFSat Used as...
  • Page 181 Reference Manual for EL470 IP Satellite Modem Modem Command AGC level clipping info AGC lvl clipping DmMeasAGCSat Used as Command(s) Page variable of DmMeasAGCStruct Description Readout of the automatic gain control (AGC) level clipping information. When reading saturated values for the receive level, the clipping info will identify the direction of saturation or return equal if the receive level is within range.
  • Page 182 Reference Manual for EL470 IP Satellite Modem Modem Command AGCCo level clipping AGCCo lvl clipping info DmMeasAGCCoSat Command ntcDevsMod01DmMeasAGCCoSat 1.3.6.1.4.1.5835.3.1.13.1.33.1.1 Values Factory Default Enumeration Value equal > < Command Power spectral density Power spectral densi DmMeasAGCCo Used as Command(s) Page...
  • Page 183 Reference Manual for EL470 IP Satellite Modem Modem Command VLAN ID VLAN ID IfChConfigEthRxVlanId Used as Command(s) Page variable of IfChConfigEthRx Description Configuration of the VLAN identifier for filtering received Ethernet packets in a channel configuration. RMCP Access Normal user : RW...
  • Page 184 Reference Manual for EL470 IP Satellite Modem Modem Command Dest IP address Dest IP address IfChConfigEthRxIp Values Factory Default String Description 0.0.0.0 length : 0 .. 15 format : \d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3} Command IP netmask IP netmask IfChConfigEthRxIpMask Used as Command(s) Page...
  • Page 185 Reference Manual for EL470 IP Satellite Modem Modem Command OUT PID OUT PID IfChConfigEthRxPID Used as Command(s) Page variable of IfChConfigEthRx Description Configuration of the PID of the outgoing MPEG transport stream on which the incoming Ethernet packets in a channel configuration are transmitted.
  • Page 186 Reference Manual for EL470 IP Satellite Modem Modem Command Packing delay Packing delay IfChConfigEthRxPacking Delay 0 .. 1000 Command Air-MAC mode Air-MAC mode IfUleSettingsDestMac Used as Command(s) Page variable of IfUleSettings Description Variable that contains the destination Air-MAC addressing method used during ULE encapsulation or decapuslation.
  • Page 187 Reference Manual for EL470 IP Satellite Modem Modem Command IN ISI IN ISI IfChConfigEthTxISI Used as Command(s) Page variable of IfChConfigEthTx Description Configuration of the DVB-S2 input stream identifier. The DVB-S2 input stream identifier or ISI is present in the second byte position of the MATYPE field in the baseband header of a DVB-S2 baseband frame.
  • Page 188 Reference Manual for EL470 IP Satellite Modem Modem Command IN Air-MAC address IN Air-MAC address IfChConfigEthTxAirMac SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfChConfigEthTxAirMac 1.3.6.1.4.1.5835.3.1.4.1.68.1.1 Values Factory Default String Description 00:00:00:00:00:00 length : 17 (fixed) format : ^([\da-fA-F]{2}:){5}[\da-fA-F]{2}$ Command OUT VLAN ID OUT VLAN ID...
  • Page 189 Reference Manual for EL470 IP Satellite Modem Modem Command IfUleSettingsCRC Used as Command(s) Page variable of IfUleSettings Description Variable that contains the CRC method used during ULE encapsulation or decapuslation. CRC enabled: CRC calculation. • CRC disabled: No calculation, no check.
  • Page 190 Reference Manual for EL470 IP Satellite Modem Modem Command IfGBSSettingsCRC Used as Command(s) Page variable of IfGBSSettings Description Configuration of the CRC calculation in case of XPE encapsulation or decapsulation: Enabled: CRC calculation is used. • Disabled: No CRC calculation is used.Remark: When CRC •...
  • Page 191 Reference Manual for EL470 IP Satellite Modem Modem Command Stream Id Stream Id IfStrConfigStreamId SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfStrConfigStreamId 1.3.6.1.4.1.5835.3.1.4.1.106.1.1 Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 1 .. 35 Command Active Active IfStrConfigEnable Used as...
  • Page 192 Reference Manual for EL470 IP Satellite Modem Modem Command Encap ID error Encap ID error IfDvbs2BboerxErrEncapId Used as Command(s) Page variable of IfDvbs2BboerxErrors Description Readout of the ntS2BBFoE RX error counter. The counter increases in case of a wrong encapsulator identifier.
  • Page 193 Reference Manual for EL470 IP Satellite Modem Modem Command Seq nbr error Seq nbr error IfDvbs2BboerxErr Sequence Frames Frames 0 .. 4294967295 Command IP volume = 0 IP volume = 0 IfDvbs2BboerxErrIpVol0 Used as Command(s) Page variable of IfDvbs2BboerxErrors Description Readout of the ntS2BBFoE RX error counter.
  • Page 194 Reference Manual for EL470 IP Satellite Modem Modem Command Padding volume Padding volume IfDvbs2BboerxCurPadding Volume RMCP Access Normal user : R Command Expert user : R SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfDvbs2BboerxCurPaddingVolume 1.3.6.1.4.1.5835.3.1.4.1.136.1.1 Values GUI Unit Cmd Unit Factory Default (CU)
  • Page 195 Reference Manual for EL470 IP Satellite Modem Modem Command Padding volume Padding volume IfDvbs2BboerxIntervalPad Volume Used as Command(s) Page variable of IfDvbs2BboerxIntervalStats Description Readout of the padding volume of an ntS2BBFoE receiver, counted in the previous measuring interval. RMCP Access...
  • Page 196 Reference Manual for EL470 IP Satellite Modem Modem Command Current device Operating mode operating mode SyDevModeState Values Factory Default Enumeration Value normal Normal Expert Command Es/No level clipping info DmMeasEsNoSat Used as Command(s) Page variable of DmMeasEsNoStruct Description Readout of the Es/No level clipping information. When reading saturated values for the Es/No estimation, the clipping info will identify the direction of saturation or return equal if the value is within range.
  • Page 197 Reference Manual for EL470 IP Satellite Modem Modem Command Link margin clipping Link margin clipping info DmEstLinMarSat Used as Command(s) Page variable of DmEstLinMarStruct Description This variable gives an indication of a clipped link margin. This happens when the channel Es/No (decoder) saturates to a maximum.
  • Page 198 Reference Manual for EL470 IP Satellite Modem Modem Command Active Active IfBriIfEnable SNMP Table ntcDevsMod01InterfaceEntry Command ntcDevsMod01IfBriIfEnable 1.3.6.1.4.1.5835.3.1.4.1.182.1.1 Values Factory Default Enumeration Value disabled Disabled Enabled Command Local VLAN Local VLAN IfBriIfLocalVlan Used as Command(s) Page variable of IfBriIfEntry Description Configuration of the local VLAN of this IP interface.
  • Page 199 Reference Manual for EL470 IP Satellite Modem Modem Command Local IP Netmask Local IP Netmask IfBriIfLocalIpMask Used as Command(s) Page variable of IfBriIfEntry Description Configuration of the netmask that identifies the local subnet on the IP interface. RMCP Access Normal user : RW...
  • Page 200 Reference Manual for EL470 IP Satellite Modem Modem Command Remote IP address Remote IP address IfBriIfRemoteIp1 1.3.6.1.4.1.5835.3.1.4.1.188.1.1 Values Factory Default String Description 0.0.0.0 length : 0 .. 15 format : \d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3} Command Remote IP netmask Remote IP netmask IfBriIfRemoteIpMask1 Used as...

  • Page 201: Variables Only Used Via Other Commands

    Reference Manual for EL470 IP Satellite Modem Modem Variables only Used via other Commands Variable WI user login name WI user login name WILogInUser Used as Command(s) Page variable of WIUsers Description Variable that holds the user name for the web interface user.
  • Page 202 Reference Manual for EL470 IP Satellite Modem Modem Variable WI user login WI login password password WILogInPass Used as Command(s) Page variable of WIUsers Description Variable that holds the password for the web interface user. Values Factory Default String Description length : 0 ..
  • Page 203 Reference Manual for EL470 IP Satellite Modem Modem Variable Guaranteed size (in Guaranteed size (in mS) per flow IfQosQueueGuarPerFlow Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 1 .. 10000 Variable Max size (in mS) per Max size (in mS) per...
  • Page 204 Reference Manual for EL470 IP Satellite Modem Modem Variable classifier classifier IfEthQosRuleClassif ip.tos==8,16 ip.dscp==8-16 ip.dscp==8,16 ip.src==1.2.3.4 ip.dst==1.2.3.4 Values Factory Default String Description length : 0 .. 30 format : any chars Variable Priority Priority IfEthQosRulePrio Used as Command(s) Page variable of...
  • Page 205 Reference Manual for EL470 IP Satellite Modem Modem Variable BB TX TS Counter BB TX TS Counter IfBBTXCounter Used as Command(s) Page variable of IfBBCounters Description Variable that contains the number of transport stream frames transmitted to baseband interface. Remark: Usually a modulator card is attached to this baseband interface.
  • Page 206 Reference Manual for EL470 IP Satellite Modem Modem Variable BB RX Dropped BB RX Dropped IfBBRXDropCounter Used as Command(s) Page variable of IfBBCounters Description Readout of the number of frames dropped at the baseband interface because the baseband buffer is full or because the frame has an invalid or unknown format.
  • Page 207 Reference Manual for EL470 IP Satellite Modem Modem Variable BB TX Eth queue max BB TX Eth queue max filling IfBbTxEthqMaxFilling Used as Command(s) Page variable of IfBbTxEthqStats Description Variable that contains the maximum filling level of the baseband TX Ethernet queue.
  • Page 208 Reference Manual for EL470 IP Satellite Modem Modem Variable Ethernet IN Dropped Ethernet IN Dropped IfMPEGoUDPStatsRXMtu Drop Used as Command(s) Page variable of IfMPEGoUDPStats Description Variable that contains the number if IP frames dropped by MPEG over IP receiver. Values...
  • Page 209 Reference Manual for EL470 IP Satellite Modem Modem Variable Ethernet OUT TS Ethernet OUT TS IfMPEGoUDPStatsTXMpeg Packets Used as Command(s) Page variable of IfMPEGoUDPStats Description Variable that contains the number of MPEG transport stream packets transmitted to the Ethernet interface.
  • Page 210 Reference Manual for EL470 IP Satellite Modem Modem Variable Ethernet OUT IP bytes Ethernet OUT IP byte IfMPEGoUDPStatsTXMtu Bytes Used as Command(s) Page variable of IfMPEGoUDPStats Description Variable that contains the number of bytes sent to the Ethernet interface (counted at transport layer).
  • Page 211 Reference Manual for EL470 IP Satellite Modem Modem Variable MAX IP volume MAX IP volume reques requested IfVolreqStatsMovMaxVol Used as Command(s) Page variable of IfVolreqStats Description Variable that contains the moving maximum of the last 32 IP volume requests converted to bits per second.
  • Page 212 Reference Manual for EL470 IP Satellite Modem Modem Variable RX DFL errors RX DFL errors IfS2BBFoERxDflErrors Used as Command(s) Page variable of IfS2BBFoERxCounters Description Variable that contains the DVB-S2 baseband frames over Ethernet RX data field length errors. Values GUI Unit...
  • Page 213 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap IN Bitrate Encap IN Bitrate IfUleStatsTXMtuRate Used as Command(s) Page variable of IfUleStats Description Variable that contains the bitrate of the Ethernet frames encoded by the ULE processor. Values GUI Unit...
  • Page 214 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap OUT Idle Encap OUT Idle IfUleStatsTXIdle Used as Command(s) Page variable of IfUleStats Description Variable that contains the number of times that a packet is padded with idle bytes (0xFF) during encapsulation.
  • Page 215 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap IN TS Decap IN TS IfUleStatsRXMpegPackets Used as Command(s) Page variable of IfUleStats Description Variable that contains the number of MPEG transport stream packets processed during decapsulation over the last period.
  • Page 216 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap IN Idle Decap IN Idle IfUleStatsRXIdle Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) Packets Packets 0 .. 4294967295 Variable Encap IN Ethernet Encap IN Ethernet IfMpeStatsTXMtuPackets...
  • Page 217 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap OUT Ethernet Decap OUT Ethernet IfMpeStatsRXMtuPackets Used as Command(s) Page variable of IfMpeStats Description Variable that contains the number of Ethernet packets received during decapsulation over the last period. Values...
  • Page 218 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap IN CRC Decap IN CRC IfMpeStatsRXCRCErrors Used as Command(s) Page variable of IfMpeStats Description Variable that contains the number of times that a CRC error was detected during processing. Values...
  • Page 219 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap OUT TS Encap OUT TS IfDPStatsTXMpegPackets Used as Command(s) Page variable of IfDPStats Description Variable that contains the number of MPEG-2 transport stream packets encoded over the last measuring period.
  • Page 220 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap OUT Idle Encap OUT Idle IfDPStatsTXIdle Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) Packets Packets 0 .. 4294967295 Variable Decap OUT Ethernet Decap OUT Ethernet IfDPStatsRXMtuPackets...
  • Page 221 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap IN TS Decap IN TS IfDPStatsRXMpegPackets IfDPStatsReset. Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) Packets Packets 0 .. 4294967295 Variable Decap IN Pop Decap IN Pop...
  • Page 222 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap IN Ethernet Encap IN Ethernet IfGBSStatsTXEthPackets Used as Command(s) Page variable of IfGBSStats Description Variable that contains the number of Ethernet packets received over the last period that were encapsulated.
  • Page 223 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap OUT BB Fram Encap OUT BB Fram IfGBSStatsTXBBFrames Used as Command(s) Page variable of IfGBSStats Description Variable that contains the number of DVB-S2 baseband frames encoded by the interface card over the last statistics period.
  • Page 224 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap IN BB Fram Decap IN BB Fram IfGBSStatsRXBBBytes Used as Command(s) Page variable of IfGBSStats Description Variable that contains the number of bytes from the DVB-S2 baseband frames processed during decapsulation over the last period.
  • Page 225 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap OUT Ethernet Decap OUT Ethernet IfGBSStatsRXEthPackets Used as Command(s) Page variable of IfGBSStats Description Variable that contains the number of Ethernet packets that are output during decapsulation over the last period.
  • Page 226 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap IN Ethernet Encap IN Ethernet IfGSEStatsTXEthPackets Used as Command(s) Page variable of IfGSEStats Description Number of ethernet packets received over the last period that were encapsulated Values GUI Unit Cmd Unit...
  • Page 227 Reference Manual for EL470 IP Satellite Modem Modem Variable Encap OUT BB Fram Encap OUT BB Fram IfGSEStatsTXBBFrames Used as Command(s) Page variable of IfGSEStats Description Number of DVB-S2 Baseband Frames encoded by the interface card over the last statistics period.
  • Page 228 Reference Manual for EL470 IP Satellite Modem Modem Variable Decap IN BB Fram Decap IN BB Fram IfGSEStatsRXBBFrames Used as Command(s) Page variable of IfGSEStats Description Number of DVB-S2 Baseband frames processed during decapsulation over the last period Values GUI Unit...
  • Page 229 Reference Manual for EL470 IP Satellite Modem Modem Variable Decaps IN Dropped Decaps IN Dropped IfGSEStatsRXDropped behaved systems should have 0 drops Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) Frames Frames 0 .. 4294967295 Variable Decap OUT Ethernet...
  • Page 230 Reference Manual for EL470 IP Satellite Modem Modem Variable Decaps IN Fragmented Decaps IN Fragmented IfGSEStatsRXFragmented Used as Command(s) Page variable of IfGSEStats Description Number of times that a GSE frame was fragmented during decapsulation over the last period. Values...
  • Page 231 Reference Manual for EL470 IP Satellite Modem Modem Variable TX Bytes TX Bytes IfVLANStatsTxBytes Used as Command(s) Page variable of IfVLANStats Description Variable that contains the number of bytes transmitted over VLAN (kernel counter). Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) 0 ..
  • Page 232 Reference Manual for EL470 IP Satellite Modem Modem Variable Bytes dropped Bytes dropped IfQosStatsBytesDropped service class. Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU) Bytes Bytes 0 .. 4294967295 Variable DVB-S2 Stream Id DVB-S2 Stream Id MoMonAcmStreamStrid...
  • Page 233 Reference Manual for EL470 IP Satellite Modem Modem Variable MODCOD MODCOD MoMonAcmStreamModcod QPSK-5/6 QPSK-6/7 QPSK-7/8 QPSK-1/4 QPSK-1/3 QPSK-2/5 QPSK-3/5 QPSK-4/5 QPSK-8/9 QPSK-9/10 16APSK-2/3 16APSK-3/4 16APSK-4/5 16APSK-5/6 16APSK-8/9 16APSK-9/10 32APSK-3/4 32APSK-4/5 32APSK-5/6 32APSK-8/9 32APSK-9/10 8PSK-3/5 8PSK-2/3 8PSK-3/4 8PSK-5/6 8PSK-6/7 8PSK-7/8 8PSK-8/9...
  • Page 234 Reference Manual for EL470 IP Satellite Modem Modem Variable DVB-S2 Stream Id DVB-S2 Stream Id MoMonAcmDmSupvStrid 1 .. 35 Variable EsNo EsNo MoMonAcmDmSupvEsno Used as Command(s) Page variable of MoMonAcmDmSupvEntry Description EsNo of ACM enabled demodulator. Values GUI Unit Cmd Unit...
  • Page 235 Reference Manual for EL470 IP Satellite Modem Modem Variable MODCOD MODCOD MoMonAcmDmSupvModcod 8PSK-8/9 8PSK-9/10 Variable #rxed #rxed MoMonAcmDmSupvNumRx Used as Command(s) Page variable of MoMonAcmDmSupvEntry Description Number of received ACM messages Values GUI Unit Cmd Unit Factory Default (CU) Expert Range (CU)
  • Page 236 Reference Manual for EL470 IP Satellite Modem Modem Variable Device mode status Device mode status r reply SyDevModeReply Used as Command(s) Page variable of SyDevMode Description Status reply for the device mode command. Values Factory Default Enumeration Value Success Failed...
  • Page 237 Reference Manual for EL470 IP Satellite Modem Modem Variable ActionKey command ActionKey command status SyActionKeyReply are executed. Values Factory Default Enumeration Value Success Failed Variable Engineering string Index index ODUInfoId Used as Command(s) Page variable of ODUInfoReq Description Temporary variable containing the outdoor unit engineering string index.
  • Page 238 Reference Manual for EL470 IP Satellite Modem Modem Variable Configuration status Configuration status SyConfigStatus SyCfgName Description Variable that replies the status after load and save configuration operations. Values Factory Default Enumeration Value Success Failed Variable Last loaded config Loadd conf. num.
  • Page 239 Reference Manual for EL470 IP Satellite Modem Modem Variable Alarm string Alarm string AlAlarmString AlAlarmsMode Description This variable contains the concatenated string of individual replies for alarm requests. Values Factory Default String Description 111111111111111 length : 71 (fixed) 111111111111111 format : any chars...
  • Page 240 Reference Manual for EL470 IP Satellite Modem Modem Variable Device alarm Alarm Id identification AlAlarmId Tx 2 signal Tx 3 signal Tx 4 signal Clock PLL Synthesiser Out of lock LO1 Out of lock LO2 RF phase lock DRO ODU communication...
  • Page 241 Reference Manual for EL470 IP Satellite Modem Modem Variable Alarm events Alarm events AlAlarmCounter events events 0 .. 255 Command Active Active IfDvbs2BboeRxEnable Used as Command(s) Page variable of IfDvbs2BboeRxInstances Description Selection if the configuration entry is enabled or not.

  • Page 242: Test

    Reference Manual for EL470 IP Satellite Modem Modem Test EL470 >> Test In this section of the menu you can start some tests with the unit. /Modem/Test/Interfaces Command GBE Test Reset GBE Test Reset GbeTestRst Location /Modem/Test/Interfaces Description This command performs a reset of the gigabit Ethernet board for test purposes.
  • Page 243 Reference Manual for EL470 IP Satellite Modem Modem Command qos unaware eth-to- qos unaware eth-to-m mod queue size MoBufNonQosTimeLim Location /Modem/Test/Interfaces Description Configuration of the queue length in milliseconds for Ethernet packets that travel from the Ethernet interface board to the modulator board. This small queue is not quality of service aware.
  • Page 244 Reference Manual for EL470 IP Satellite Modem Modem Command Interface output signal Output signal selection IfComTxSig Location /Modem/Test/Modulation Description Configuration of the output signal placed on all outputs of the interface board. By default the active external interface input signal is brought back out.
  • Page 245 Reference Manual for EL470 IP Satellite Modem Modem Command HPA attenuation HPA attenuation ODUSSPAAttenuation Location /Modem/Test/Modulation Description Configuration of the high power amplifier attenuation. RMCP Access Normal user : Command no access Expert user : RW SNMP Table ntcDevsMod01ODUEntry Command ntcDevsMod01ODUSSPAAttenuation 1.3.6.1.4.1.5835.3.1.14.1.7.1.1...
  • Page 246 PRBS (pseudo random binary sequence) data stream of 2^23-1 as specified in CCITT Rec. 0.151. In conjunction with a Newtec demodulator that is standard equipped with an automatic PRBS detector, the possibility exists to determine the actual BER performance of a satellite link.
  • Page 247 Reference Manual for EL470 IP Satellite Modem Modem Command Testgen FEC-rate and Testgen FEC-rate and modulation MoTgFecMod2 Location /Modem/Test/Modulation Description Configuration of the DVB-S2 FEC-rate and modulation parameters on the test generator when MoTgFrameFormat is set to baseband frames. The selection of the FEC-rate and modulation are coupled and depend on the present modulation standard and capability of the device.
  • Page 248 Reference Manual for EL470 IP Satellite Modem Modem Command Testgen Pilot insertion Testgen Pilots MoTgPilots Location /Modem/Test/Modulation Description Configuration command that enables or disables the physical layer pilot insertion for the test generator. When enabled, every 16 slots (of 90 symbols) the modulator will insert 36 non-modulated symbols to aid in receiver synchronisation.
  • Page 249 Reference Manual for EL470 IP Satellite Modem Modem Command Buffer setpoint Buffer setpoint MoBufSetp Location /Modem/Test/Modulation Only valid for DVB-S2 modes. Description Configuration of the input FIFO buffer set-point for the clock loop when transmit clock is configured for external operation. External operation means that the clock is slaved to the input signal.
  • Page 250 Reference Manual for EL470 IP Satellite Modem Modem Command Baseband NCO BB NCO mode programming mode MoBbNcoMode Location /Modem/Test/Modulation Description Configuration of the baseband network clock oscillator programming mode. The test generator on the modulator board is clocked by an independent baseband network clock oscillator.
  • Page 251 Reference Manual for EL470 IP Satellite Modem Modem Command Testgenerator output Testgen timing mode timing mode MoTgTimMode Location /Modem/Test/Modulation Only valid for DVB-S2 modes. Description Configuration of the output timing mode on the test generator. The internal test generator can operate in two timing modes: Free running: The output rate is solely controlled by the •...
  • Page 252 Reference Manual for EL470 IP Satellite Modem Modem Command Adaptive equalising Adaptive equalising filter DmEquCtrl Location /Modem/Test/Demodulation Description Configuration of the adaptive equalising filter on the demodulator. The different settings are: On: The equaliser is enabled. • Off: The equaliser is disabled.

  • Page 253: Alarms

    Reference Manual for EL470 IP Satellite Modem Alarms 6 ALARMS Alarm Types • Active alarm: alarm that is present at the time when you read the alarm. • Memorised alarm: alarm that has happened in the past but has been resolved before you read the alarm (in case of intermittent alarms or a setting that has been corrected since).
  • Page 254 Reference Manual for EL470 IP Satellite Modem Alarms Special Command Memorised alarm Mem. al. string string AlAlarmsMem Location /Config Description Readout of the concatenated string describing the state of all individual memorised alarm counters. 0: Indicates that the respective counter did not count any alarm •...
  • Page 255 Reference Manual for EL470 IP Satellite Modem Alarms Special Command Alarm mode string Alarm mode string AlAlarmsMode 1.3.6.1.4.1.5835.3.1.2.1.11.0.1 Get Command Arguments Set Command Arguments Command(s) / Variable(s) Page Command(s) / Variable(s) Page none none AlAlarmString Get Reply Values Set Reply Values...

  • Page 256: Alarm Front Panel Operation

    Reference Manual for EL470 IP Satellite Modem Alarms Special Command Memorised alarm Alarm counter counter AlAlarmMem Get Command Arguments Set Command Arguments Command(s) / Variable(s) Page Command(s) / Variable(s) Page AlAlarmId AlAlarmId Get Reply Values Set Reply Values Command(s) / Variable(s)
  • Page 257 (like disabling of RF transmit) will not be taken. This could be dangerous. Therefore you should only consider to mask alarms after you have consulted Newtec technical support. You can only mask alarms in expert mode. When you return to the normal device operating mode the alarms remain masked.

  • Page 258: Alarm List

    Reference Manual for EL470 IP Satellite Modem Alarms Alarm List  EL470 >> Alarm The following list contains all possible alarms. Alarm Label Name Description Device has been reset AlResFlag Reports that the main-controller has had a reset. This can indicate that all the parameters in the device are changed.
  • Page 259 Reference Manual for EL470 IP Satellite Modem Alarms Alarm Label Name Description generated if at least one of the monitored power supply voltages is out of range. Ethernet IfA Link AlItfaLink This interface alarm is triggered on a missing or invalid input signal (Link Down) at the ethernet interface A.
  • Page 260 Reference Manual for EL470 IP Satellite Modem Alarms Alarm Label Name Description 50 Kbps <= interface rate < 200 Kbps : [5% - 60%] nominal 12.5% This alarm is not applicable if the internal transmit clock (free running) is selected.

  • Page 261: Appendix A: Action Keys

    Reference Manual for EL470 IP Satellite Modem Appendix A: Action Keys APPENDIX A: ACTION KEYS The idea behind Action Keys is that you as system integrator can define a group of frequently executed operations to configure the device. Use the numerical keypad as a selection panel.
  • Page 262 CMD# is a complete RMCP command. Example To download the RMCP Loader, go to www.newtec.eu and choose Support > FAQ > What is RMCP loader and How to get it > RMCP LOADER download now.. Click Grouped Commands to send the following commands in a .txt file to the IP Satellite Modem.
  • Page 263 RMCP commands. Request a RMCP manual via the Newtec Service Desk tool: > Browse to http://customersupport.newtec.eu > Fill in your Username and Password >...

  • Page 264: Appendix B: Troubleshooting

    Support case logging At Newtec Cy N.V. we use a case tracking database to log and track all our support cases. Each case has a unique identifier that can be used to quickly refer to that case. Automatic escalation assures that every case receives the attention it requires.

  • Page 265: Appendix C: Abbreviations

    Reference Manual for EL470 IP Satellite Modem Appendix C: Abbreviations Appendix C: ABBREVIATIONS Acronym Definition AutoCorrelation Function Adaptive Coding Modulation Automatic Gain Control APSK Amplitude and Phase Shift Keying Address Resolution Protocol (TCP/IP) ASCII American Standard Code for Information Interchange...
  • Page 266 Reference Manual for EL470 IP Satellite Modem Appendix C: Abbreviations Acronym Definition DVB-S Digital Video Broadcasting-Satellite Frequently Asked Question Forward Error Correction (in data transmission systems) FIFO First in First Out FPGA Field Programmable Gate Array File Transfer Protocol (computer networks & systems)
  • Page 267 Reference Manual for EL470 IP Satellite Modem Appendix C: Abbreviations Acronym Definition Manual Gain Control Mobile Identification Number Multi Protocol Encapsulation Maximum Permissible Exposure (EMR or RF level) MPEG Motion Picture Experts Group Network Clock Oscillator (DVB-RCS) Network Clock Reference...
  • Page 268 Reference Manual for EL470 IP Satellite Modem Appendix C: Abbreviations Acronym Definition S2BBF S2 Base Band Frame Subsidiary Communications Authority Satellite Interactive Terminal SNMP Simple Network Management Protocol Software Tx Clock Offset Transmission Control Protocol Transport Stream Transmit User Datagram Protocol...

  • Page 269: Appendix D: List Of Commands

    Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands APPENDIX D: LIST OF COMMANDS List of Commands AESEraseAllKey............30 DmAESKeyParityISI............112 AESGroupKey...............29 DmAESOddGlobalKey...........111 AESKeyLength..............30 DmAESOddKeyISI............114 AlAlarmCounter.............232 DmAftDecBER...............102 AlAlarmCur..............247 DmBuEnable..............107 AlAlarmId...............231 DmBuRxRfFreq.............106 AlAlarmMem..............247 DmBuSwitchCnt.............107 AlAlarmsCur..............245 DmBuSwitchTimeout.............107 AlAlarmsMem..............246 DmBuSynRate...............106 AlAlarmsMode..............246 DmDecapModcodStatGSE..........141 AlAlarmStatus..............232...
  • Page 270 Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands DmModCodStatChCDSat..........171 IfBriIfLocalGateway............191 DmModCodStatChDistQEF...........172 IfBriIfLocalIp..............190 DmModCodStatChDistQEFSat........172 IfBriIfLocalIpMask............191 DmModCodStatChQEst..........171 IfBriIfLocalVlan...............190 DmModCodStatFrameCnt..........169 IfBriIfRemoteIp...............191 DmModCodStatFrameType...........169 IfBriIfRemoteIpMask............192 DmModCodStatModCod..........167 IfChConfigEthRx............58 DmModCodStatPilots............169 IfChConfigEthRxAirMac..........177 DmModCodStatSat............170 IfChConfigEthRxEnable..........174 DmModCodStatStruct............161 IfChConfigEthRxIp............175 DmModCodStatUncorCnt..........170 IfChConfigEthRxIpMask..........176 DmMPegCrcErrs............157 IfChConfigEthRxMac.............175 DmPidFilteringControl............106 IfChConfigEthRxPackingDelay........177 DmPilots.................102 IfChConfigEthRxPID............177 DmPLSSignature............104...
  • Page 271 Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands IfDvbs2BboerxErrEncapDisabled........184 IfEthUnitRedunVridB............52 IfDvbs2BboerxErrEncapId..........184 IfEthUnitRedunVrrp............51 IfDvbs2BboerxErrIpVol0..........185 IfForcePromiscuous............55 IfDvbs2BboerxErrors.............133 IfGbeConfigError............119 IfDvbs2BboerxErrSequence..........184 IfGbePacketLog.............126 IfDvbs2BboerxFrames...........183 IfGbePacketLogReason..........126 IfDvbs2BboeRxInstances..........68 IfGbeSwErrCount............120 IfDvbs2BboerxIntervalIpVolume........186 IfGbeSwError..............119 IfDvbs2BboerxIntervalPadVolume.........187 IfGBSSettings..............59 IfDvbs2BboerxIntervalStats...........134 IfGBSSettingsCRC............182 IfDvbs2BboerxIntervalSymVolume........187 IfGBSSettingsDestMac..........181 IfDvbs2BboeRxMcastIpAddress........233 IfGBSStats..............139 IfDvbs2BboeRxUdpPort..........67 IfGBSStatsReset............139 IfDvbs2BboeTxIp............67, IfGBSStatsRXBBBytes..........216 IfGBSStatsRXBBFrames..........215...
  • Page 272 Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands IfGSEStatsTXEthRate...........218 IfPacketLogFilter............125 IfGSEStatsTXFragmented..........219 IfPacketLogFiltPat............125 IfGSEStatsTXPopTimeouts...........218 IfPromiscFlag..............55 IfGSEStatsTXPushTimeouts.........219 IfProxyARPIgnoredCount..........118 IfIbSigTxed..............144 IfProxyARPRespCount..........118 IfItfaStatus..............116 IfQosOnCpuload............61 IfItfbStatus..............116 IfQosQueueEntry............61 IfMPEGoUDPRXSettingsFormat........65 IfQosQueueGuarPerFlow..........194 IfMPEGoUDPRXSettingsIP...........66 IfQosQueueMaxPerQos..........195 IfMPEGoUDPRXSettingsProfile........66 IfQosQueuePriority............194 IfMPEGoUDPRXSettingsType........65 IfQosStatsBytesDropped..........223 IfMPEGoUDPRXSettingsUDPPort........67 IfQosStatsEntry..............143 IfMPEGoUDPStats............129 IfQosStatsPriority............223 IfMPEGoUDPStatsReset..........129 IfQosStatsReset.............142 IfMPEGoUDPStatsRXMpegPackets......200...
  • Page 273 Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands IfUleStatsTXPushTimeouts...........205 MoAESKeyParityISI............96 IfVLANForwarding............56 MoAESOddGlobalKey...........95 IfVLANStats..............142 MoAESOddKeyISI............98 IfVLANStatsActive............222 MoAmplEq..............90 IfVLANStatsName............222 MoBBLEfficiency............153 IfVLANStatsRxBytes............223 MoBbNcoMode..............242 IfVLANStatsRxPackets..........223 MoBbNcoRate...............242 IfVLANStatsTxBytes............223 MoBBShortFrameRatio..........153 IfVLANStatsTxPackets..........222 MoBufCont..............146 IfVLANSupport...............53 MoBufFramSetp.............241 IfVLANTypeId..............57 MoBufNonQosTimeLim..........235 IfVolreqStats..............133 MoBufSetp..............241 IfVolreqStatsMovAvgVol..........202 MoBufSize..............147 IfVolreqStatsMovMaxVol..........203 MoBufTimeLimit.............234 IfVolreqStatsMovMinVol..........203...
  • Page 274 Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands MoMonOutputFreq............145 SyConfigStatus..............229 MoMonOutputMode............90 SyDevActivate..............22 MoMonSpectInv.............145 SyDevCapab..............41 MoNonLinPredMode............89 SyDevCapPass..............228 MoOccBw...............91 SyDevCapReply............228 MoODU100..............29 SyDevDispContrast............17 MoOLevelOffset.............26 SyDevGenerate.............22 MoOpOutputFreq............75 SyDevHwCapab............39 MoOutLevelDet..............147 SyDevHwId..............36 MoOutLevelPlan............76 SyDevHwVer..............39 MoOutputEnable............77 SyDevIPAddr..............15 MoOutputLevel..............75 SyDevIPCoreSwId............42 MoPacketCnt..............151 SyDevIPCoreSwVer............42 MoPacketRate...............151 SyDevIPGateWay............15 MoPhaseErrDev............148...
  • Page 275 Reference Manual for EL470 IP Satellite Modem Appendix D: List of Commands SyRef10MCtrl..............25 SyTestRst..............243 SyRef10MLevel.............32 SyTrapCommunity............19 SyRef10MTuning............24 SyTrapIPAddr..............18 SyRefClock..............24 SyTSRapport..............43 SyRFCalcForm..............33 SyUnitRedunOperState..........115 SyROCommunity............18 WILogInOldPass............193 SyRWCommunity............18 WILogInPass..............194 SySaveConfNum............230 WILogInReply..............194 SyScreenSaveDly............17 WILogInUser..............193 SyScreenSaveMsg............17 WILogInUserAccess............193 SySigIp................62 WIUsers.................19 SySnmpVer..............39 version 3.1 SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS...

Table of Contents