Newtec MDM6000 User Manual page 42

Block Diagram
Traffic Classification
The encapsulation block also takes care of the traffic classification and shaping according to the
configured rules per terminal or for groups of terminals, allowing even hierarchical traffic shaping.
Overall Monitoring
The output of this block are BBFs that are forwarded to the modulator block.
The monitoring parameters of this block allow you to get a global overview of the total amount of
forwarded bits, bytes and packets.
It also indicates the number of dropped bytes and packets.
Traffic Shaping Monitoring
The traffic shaping monitoring parameters provide a detailed overview of the data flow through a
shaping node.
Channel Monitoring
The channel monitoring parameter indicate per configured channel the nominal and actual ModCod
and the used encapsulation protocol.
When ACM is enabled it is possible to immediately find out the actual ModCod that is used for the
specific channel and how much ModCod changes that had occurred during the last monitoring
iteration.
For more information please refer to section:
Stream Encapsulation. on page 222
Newtec Proprietary
Confidentiality: Unrestricted
MDM6000 Satellite Modem
V1.0
/
32 314