Oil Lubrication - Dürkopp Adler 667 Operating Instuructions

4.2 Oil lubrication

1
Fig. 31
Maintenance work to be
conducted
Lubrication of the machine
head
Hook lubrication
2
Caution: Risk of injury!
Oil can cause skin rashes.
Avoid prolonged contact with your skin.
Wash thoroughly after contact.
CAUTION!
The handling and disposal of mineral oils is subject to legal regulations.
Transfer used oil to an authorised collection point.
Protect the environment.
Take care not to spill any oil.
To lubricate the sewing machine only use the lubricating oil
equivalent oil with the following specifications:
Viscosity at 40° C:10 mm²/s
Ignition point:150° C
can be purchased from
DA -10
following part numbers:
250 ml container: 9047 000011
1 litre container:
2 litre container:
5 litre container:
Explanation
The sewing machine is equipped with a central oil wick
lubrication. All bearings (apart from the hook) are supplied by the
oil reservoir 3.
– The oil level must not drop below the "MIN" mark 5.
– Fill oil through the hole 4 in the inspection window up to
the "MAX" mark.
– Swing up sewing machine head.
– Check the oil level through inspection window 2.
– Fill the oil reservoir with oil through plug 1.
– The necessary oil quantity for the correct lubrication of
the hook is factory set by the manufacturer.
3
Fig. 32
DÜRKOPP ADLER AG
9047 000012
9047 000013
9047 000014
4
5
or an
DA-10
retail outlets under the
Operating
hours
40
8
29