Footswitch - Source Audio Reflex User Manual

Channel (Chan) Parameter
The digital (MIDI) outputs will send MIDI messages on a specific channel. There are a total of 16
channels possible.
Type Parameter
Each MIDI message sent by the digital outputs has a specific message type. The Reflex is capable of
generating three types of MIDI message:
to
LED Display
The LED Display shows the value of the currently selected parameter. Occasionally, it shows other
information such as the currently selected output or the currently selected preset (for saving and
loading).
Save Button
The Save Button is used to save a preset. For more information, refer to
Load Button
The Load Button is used to load a preset. For more information, refer to

Footswitch

A footswitch is located beneath the treadle. It can be activated when the treadle is in the toe down
position by pushing downward on the toe with some extra force. Activating the footswitch will mute
the expression outputs. The Footswitch can also be used to calibrate the range of the treadle.
Muting the Expression Outputs
When the Footswitch is activated, the LED display will show
have been muted. The behavior of the outputs depends on their shape:

All expression outputs that use a taper shape will jump to their minimum value, as defined by
the Min parameter.

All expression outputs that use an LFO shape and a depth ranging between -63 and 64 will
jump to zero.

All expression outputs that use an LFO shape and the Pedal Depth (or Inverted Pedal Depth)
mode will jump to their center value, 64.
Un-Muting the Expression Outputs
When the expression outputs are muted, they can be restored, or un-muted, by clicking the
footswitch a second time. There are two modes for un-muting the outputs: Normal and Mute
Restart. The un-mute mode can be selected using the USB Editor Software.
SA163
Continuous Controller (0 to 127)
Pitch Bend
Aftertouch
Reflex User's Guide
Preset Storage and
Preset Storage and
. This signifies that the outputs
Recall.
Recall.
19