Hearth and Home Technologies PVLP-SLP Installation Instructions Manual page 15

B. Installing Vent Cap (con't)
NOTE: Use a tape measure to measure the distance
from the front cover to the flange on the air baffle.
See Figure 3.17.
9. Reinstall the exhaust housing assembly into the cap
after the wiring and baffle adjustment have been
completed.
10. The front cover must be removed to access the mount-
ing holes for the cap. Remove the four screws that
attach the front cover, then remove the cover. See
Figure 3.18.
Figure 3.17
Figure 3.18
15
Hearth & Home Technologies • Power Vent Low Profile (PVLP-SLP) Instructions • 4052-900 Rev. M• 09/17