Top Panel I/O & Functions - Vecow ARS-2000 User Manual

2.3 Top Panel I/O & Functions
2.3.1 Isolated DIO (STANDARD) / GPIO (LIGHT)
There is a 32-bit (16-bit DI, 16-bit DO) with 2 DIO connectors on the rear side.
DI/DIO supports NPN(sink) and PNP(Source) modes, and each DI channel is
equipped with a photocouper for isolated protection. Each DO with isolator chip
is configured by a Jumper for each DIO connector.
DO Safety-Related Certifications:
• 4242-VPK Basic Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1
• 3-KVRMS Isolation for 1 minute per UL 1577
• CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment Standards
• GB4943.1-2011 CQC Certified
DIO Connectors pin out:
DIO
DIO1
©Vecow ARS-2000 User Manual
Pin No. Definition
1 INPUT 0
2 INPUT 1
3 INPUT 2
4 INPUT 3
5 INPUT 4
6 INPUT 5
20 11 20
10 1 10
Isolated Isolated
DIO 2
PIN 1 ~ 8 D I PIN 11 ~ 18 DO PIN 1 ~ 8 D I
GETTING TO KNOW YOUR ARS-2000
11
1
DIO 1
PIN 11 ~ 18 DO
Function
SIO_GPI80
SIO_GPI81
SIO_GPI82
SIO_GPI83
SIO_GPI84
SIO_GPI85
28