Vecow ARS-2000 User Manual page 31

The DVI-I connector on the front panel supports both DVI and VGA display
modes. This connector can output DVI signals. The DVI output mode supports
up to 1920 x 1200 resolution. The DVI mode is automatically selected according
to the connected display and you will need a DVI-I cable when connecting
to a display device. The VGA output mode also supports up to 1920 x 1200
resolution. If using VGA function, you will need a DVI-I to VGA dongle connected
to DVI-I device. Below is the DVI-I to VGA dongle image :
2.2.8 USB 3.0
PoE PoE
DC-IN
DVI-D
RST
V -
V+
DVI-I
On | Off
IGN
LAN 2 LAN 3
LAN 1
24
©Vecow ARS-2000 User Manual GETTING TO KNOW YOUR ARS-2000