Transmitting - Kenwood NX-3000 Series User Manual

TRANSMITTING

1
Select the desired zone and channel using the buttons programmed as [Zone
Up]/ [Zone Down] and [Channel Up]/ [Channel Down].
2
Press the PTT switch and speak into the microphone. Release the PTT switch to
receive.
The LED indicator lights red while transmitting and green while receiving a signal. This
●
indicator can also be disabled by your dealer.
For best sound quality at the receiving station, hold the microphone approximately 1.5
●
inches (3 cm to 4 cm) from your mouth.
Making Group Calls (NXDN Conventional/ DMR Conventional)
o
You can select a group ID from the list to make a call to those parties on a
Conventional channel.
1
Press the button programmed as [Group], [Group + Short Message] or [Group
+ Status] to enter Group Call Mode.
Alternatively, press the button programmed as [Menu] to enter Group Call Mode using
the Menu Mode.
The group ID list appears on the display.
●
2
Press the [J] and [K] buttons to select a Group ID/ name from the list that has
been pre-entered into your transceiver.
3
Press and hold the PTT switch to make the call.
The " " icon blinks. "Group" and the Group name of the target transceiver are
●
displayed.
Speak into the transceiver as you would during a normal call.
●
5