Kenwood NX-3000 Series User Manual page 58

4
Press the [ ] button or the [J] and [K] buttons to select "Find Device".
The transceiver starts to search for available Bluetooth devices. Up to 16 devices can be
found and listed on the display.
The search will end after 30 seconds or when 16 devices have been found.
●
Pairing Bluetooth devices
o
1
Press the [J] and [K] buttons to select the device to connect to.
In this case, select the headset device.
2
Press the [ ] or [ ] button to connect.
3
Press the [ ] or [ ] button to start pairing.
Alternatively, you can pressed the button programmed as [Bluetooth Connect/
Disconnect].
The LED indicator blinks in blue.
●
For Bluetooth devices that does not support Simple Secure Pairing, you need to enter
●
a Personal Identification Number (PIN) code. You need to operate the Bluetooth
headset to proceed with pairing.
58