Kenwood NX-3000 Series User Manual page 35

Priority Channel Editing
o
If the Priority channel (Priority 1/ Priority 2) has been set as Operator Selectable by
your dealer, you can reprogram the Priority channels.
Note:
A zone/ channel must be added to the scan list before the channel can be set as a Priority
●
channel.
1
Select the channel where the scan list to be edited has been set, press the button
programmed as [Scan Program] to enter Scan Program Mode.
Alternatively, press the button programmed as [Menu] to enter Scan Program Mode using
the Menu Mode.
2
Press the [ ] button to edit the Priority channel.
3
Press the [J] and [K] buttons to select the desired priority.
4
Press the [ ] or [ ] button to confirm your selection.
5
Press the [ ] button to exit scan programming.
35