Basic Operations; Switching Power On/ Off - Kenwood NX-3000 Series User Manual

SWITCHING POWER ON/ OFF

Portable
Turn the Power switch/ Volume control clockwise to switch the transceiver power
ON.
The following screen appears if the Custom Start-up Screen has not been set.
●
Turn the Power switch/ Volume control counterclockwise to switch the transceiver
power OFF.
Mobile
Press [ ] to switch the transceiver ON.
The following screen appears if the Custom Start-up Screen has not been set.
●
Press [ ] again to switch the transceiver OFF.
Transceiver Password
o
If the transceiver is password protected, "Input Password" will appear on the display
when the power is turned on. To unlock the transceiver, enter the correct password.
1
Press the button programmed as [Transceiver Password] to enter Transceiver
Password Mode.
Alternatively, press the button programmed as [Menu] to enter Transceiver Password
Mode using the Menu Mode.
If a password has been registered and the [Transceiver Password] function has not
●
been programmed to a button or configured to the menu, the transceiver enters
Transceiver Password Mode when the power is turned on.
2
Enter a number using the [J] and [K] buttons.
On full button model Portable transceivers or Mobile transceivers with microphone with
●
keypad, you can enter the password directly by pressing the keypad.
3
Press the [ ] or [ ] button to accept the number.

BASIC OPERATIONS

3