Kenwood NX-3000 Series User Manual page 66

Playback
You can play back the voice recordings recorded using Auto Recording.
1
Press the button programmed as [Playback] to enter Playback mode.
Alternatively, press the button programmed as [Menu] to enter Playback mode using the
Menu Mode.
The voice recordings are listed on the display.
●
2
Press the [J] and [K] buttons to move up and down the list.
3
Press the [ ] or [ ] button to play back.
After playing back a recording, the transceiver will automatically play the next recording
●
until the last recording on the list is played.
To pause or resume playback, press the [ ] or [ ] button.
●
To skip to the next or previous recording, press the [H]/ [I] button. Press and hold the
●
button to fast-forward or rewind.
To play back the last recording directly
o
Press the button programmed as [Playback (Last Recording)] to play back the
latest audio data recorded using the Auto Recording function.
To delete a recording
o
1
Press the [ ] or [#] button while the list is displayed.
A confirmation message appears on the display.
●
2
Press the [ ] or [ ] button to delete.
To delete all recordings
o
1
Press and hold the [
A confirmation message appears on the display.
●
2
Press the [ ] or [ ] button to delete.
66
] or [#] button while the list is displayed.