Kenwood NX-3000 Series User Manual page 49

While Status Message list or Short Message list is displayed:
–
[H]: Message > Caller ID > CH > Time Stamp
[I]: Message > Time Stamp > CH > Caller ID
To delete the selected message, press the [
●
press and hold the [
3
Press [ ] to return to normal operation.
SHORT MESSAGES
This transceiver can receive short data messages which contain a maximum of 48
characters.
On Portable transceivers (full button model and standard button model) and Mobile
●
transceivers, short messages received are displayed the same as Status messages and
are stored in the same stack memory. A maximum of 32 or 128 short messages can be
stored in the stack memory depending on the Short Message Stack setting.
LONG MESSAGES
To send and receive long messages, you must connect the transceiver to a PC. Ask
your dealer for details.
Long messages can contain a maximum of 4096 characters.
●
GPS REPORT
GPS data can be manually transmitted by pressing the button programmed as [Send
the GPS Data], or by accessing the Menu {p. 9} . If set up by your dealer, GPS data
may be automatically transmitted at a preset time interval.
When using the GPS function, you must first connect the GPS antenna. (NX-3720G,
●
NX-3720HG, NX-3820G, NX-3820HG only)
] or [#] button for 1 second.
] or [#] button. To delete all messages,
49