Kenwood NX-3000 Series User Manual page 57

TURNING Bluetooth ON/ OFF
Press the button programmed as [Bluetooth] to turn the Bluetooth function on or off.
Alternatively, press the button programmed as [Menu] to enter Bluetooth Mode using
the Menu Mode.
Press the [J] and [K] buttons to select "On" or "Off".
Press the [ ] or [ ] button to confirm your selection.
" " appears on the display when the Bluetooth function is turned on. If a Bluetooth device
●
is already connected to your transceiver, "
FINDING Bluetooth DEVICES
Your transceiver can automatically search for Bluetooth devices.
Note:
Put your Bluetooth headset into pairing standby mode beforehand.
●
1
Press the [ ] button to enter Menu Mode.
2
Press the [ ] button to select the Bluetooth category.
3
Press the [ ] button or the [J] and [K] buttons to select "BT Device".
" appears on the display.
57