Clock - Kenwood NX-3000 Series User Manual

Your transceiver can track the time with its built-in clock. If activated by your dealer,
the time will be displayed when the transceiver power is turned ON.
Note:
Removing or leaving the battery pack uncharged for extended periods will cause the clock
●
time to clear.
CLOCK ADJUSTMENT
To set the time:
1
Press the button programmed as [Clock Adjustment] to enter Clock Adjustment
Mode.
Alternatively, press the button programmed as [Menu] to enter Clock Adjustment Mode
using the Menu Mode.
The current time setting appears.
●
2
Press the [J]/[K] buttons to increase or decrease the month setting.
3
Press the [I] button to set the month and cycle to the day setting.
4
Repeat steps 2 and 3 to set the day, year, hour, and minute.
5
Press the [ ] button to exit Clock Adjustment mode.
You can press the [
●
44

CLOCK

] button at any time to exit Clock Adjustment mode.