Trunking Calls - Kenwood NX-3000 Series User Manual

MAKING A TELEPHONE CALL (NXDN TRUNKING)
Autodial
o
Autodial allows you to quickly call numbers that have been programmed onto your
transceiver.
1
Press the button programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the button programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The first entry in the Autodial list appears on the display.
●
2
Press the [J] and [K] buttons to select your desired Autodial list number.
3
Press the PTT switch to make the call.
Autodial Programming
o
You can reprogram your Autodial list to add or delete any DTMF Codes.
1
Press the button programmed as [Autodial Programming] to enter Autodial
Programming Mode.
Alternatively, press the button programmed as [Menu] to enter Autodial Programming
Mode using the Menu Mode.
The first entry in the Autodial list appears on the display.
●
2
Press the [J] and [K] buttons to select your desired list.
3
Press the [ ] or [#] button to delete the Autodial list.
4
Press the [ ] or [ ] button to edit the Autodial list.
5
Press the [ ] or [ ] button to confirm your selection.
6
Press the [ ] button to exit Autodial Programming Mode.
Manual Dialing
o
1
Press the button programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the button programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The last called unit appears on the display.
●
2
Press the [ ] button to enter manual input mode.
To return to the Autodial list, press the [
●
3
Enter your desired number.
You can select a digit by using the [J] and [K] buttons, and then set the selected digit
●
by pressing the [ ] button. Repeat this process to enter the entire number.
Alternatively, on full button model Portable transceivers or Mobile transceivers with
microphone with keypad, you can enter the number directly.
To delete the number entered, press the [
●
hold the [
4
Press the PTT switch to make the call.
5
To end the call, press the button programmed as [Clear].

TRUNKING CALLS

] button to delete all digits.
] button again.
] button to delete one digit, or press and
37