Basic Operations; Djusting The Electing A; Olume; On/ Off - Kenwood NEXEDGE NX-200 Instruction Manual

S p
witching ower
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the Power switch/ Volume control counterclockwise fully
to switch the transceiver OFF.
■ Transceiver Password
If the transceiver is password protected, "PASSWORD" will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the password:
1 Select a character using
• On keypad models, you can enter the password directly.
2 Press
• This step is unnecessary when using the keypad.
3 Repeat steps  and 2 to enter the entire password.
• Press
# to delete all characters.
4 Press
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of  digits.
A
djuSting the
Rotate the Power switch/ Volume control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.

BASIC OPERATIONS

on/oFF
to enter the selected character.
or # to delete a character. Press and hold
or to confirm the entry.
v

olume

/ .
or
9