Using Recovery Wizard To Restore Computer - Winmate IK70 User Manual

Mini-itx sbc with intel 7th generation core i3 / i5 / i7 processor, hdmi, display port, lvds, dual giga ethernet, usb 3.0 and ngff interface v110

Hide thumbs Also See for IK70:

Table of Contents

USER MANUAL

4.3 Using Recovery Wizard to Restore Computer

Note:

Before starting the recovery process, make sure to backup all user data.

The data will be lost after the recovery process.

Important:

Before starting the recovery process, remove the PCI/ PCIe card and

CFast card.

To enable quick one-key recovery procedure:

1. Connect the computer to the power source. Make sure the computer stays

plugged in to power source during the recovery process.

2. Turn on the computer, and when the boot screen shows up, press Tab+ F6 to

initiate the Recovery Wizard.

3. The following screen shows the Recovery Wizard. Click Recovery button to

continue.

CHAPTER 4

- 98 -

INSYDE H20 BIOS SETUP

Table of Contents