Winmate IK70 User Manual page 92

USER MANUAL
Parity
Stop Bits
Flow Control
Information
Wait Time
C.R. After Post
Text Mode
Resolution
Auto Refresh
Fail Safe Baud
Rate
CHAPTER 4
Console Redirection
Parity bit settings
Console Redirection
Stop Bits settings
Console Redirection
Stop Flow Control
Type settings
Console Redirection
port information
display time settings
Console Redirection
continue work after
POST time
Console Redirection
Text Mode
Resolution
Auto Refresh settings
Fail Safe Baud Rate
settings
- 92 -
INSYDE H20 BIOS SETUP
None Set Console Redirection
Even Parity bit
Odd
1 Bit Set Console Redirection
2 Bits Stop Bits
None Set Console Redirection
RTS/ CTS Stop Flow Control Type
XON/ XOFF
0 sec~30 sec Set Console Redirection
port information display
time
Yes Console Redirection
No continue work after
POST time
Auto Follows VGA text mode
Force 80x25 Don't care VGA, force
text mode be 80x25
Force 80x24 Don't care VGA, force
(DEL FIRST text mode be 80x24 (DEL
RAW) FIRST RAW)
Force Don't care VGA, force
80x24(DEL text mode be 80x24 (DEL
LAST RAW) LAST RAW)
Disabled When feature enabled,
Enabled screen will be auto
refresh once after detect
remote terminal was
connected
Disabled This feature will auto
Enabled detect remote terminal
baud rate and connect
C.R. serial device with
detected baud rate