Using Recovery Wizard To Restore Computer - Winmate IK70 User Manual

USER MANUAL

4.3 Using Recovery Wizard to Restore Computer

Note:
Before starting the recovery process, make sure to backup all user data.
The data will be lost after the recovery process.
Important:
Before starting the recovery process, remove the PCI/ PCIe card and
CFast card.
To enable quick one-key recovery procedure:
1. Connect the computer to the power source. Make sure the computer stays
plugged in to power source during the recovery process.
2. Turn on the computer, and when the boot screen shows up, press Tab+ F6 to
initiate the Recovery Wizard.
3. The following screen shows the Recovery Wizard. Click Recovery button to
continue.
All manuals and user guides at all-guides.com
CHAPTER 4
- 98 -
INSYDE H20 BIOS SETUP