Using Recovery Wizard To Restore Computer - Winmate IK70 User Manual

Mini-itx sbc with intel 7th generation core i3/i5/i7 processor, hdmi, display port, lvds, dual giga ethernet, usb 3.0 and ngff interface v120

Hide thumbs Also See for IK70:

Table of Contents

4.3 Using Recovery Wizard to Restore Computer

Note:

Before starting the recovery process, make sure to backup all user data.

The data will be lost after the recovery process.

Important:

Before starting the recovery process, remove any expansion card.

procedure:

1. Connect the computer to the power source. Make sure the computer stays plugged in to power source

during the recovery process.

2. Turn on the computer, and when the boot screen shows up, press F6 to initiate the Recovery Wizard.

3. The following screen shows the Recovery Wizard. Click Recovery button to continue.

4. A warning message about data loss will show up. Make sure the data is backed up before recovery,

and click Yes to continue.

5. Wait the recovery process to complete. During the recovery process, a command prompt will show up

to indicate the percent of recovery process complete. The system will restart automatically after

recovery completed.

Chapter 4: Insyde H20 BIOS Setup

To enable

quick one-key

recovery

Table of Contents