Using Recovery Wizard To Restore Computer - Winmate IK32 User Manual

66 IK32-300 SBC User Manual

5.3 Using Recovery Wizard to Restore Computer

NOTE:
Before starting the recovery process, make sure to backup all user data. The data
will be lost after the recovery process.
IMPORTANT:
Before starting the recovery process, remove the PCI/ PCIe card and CFast card.
To enable quick one-key recovery procedure:
1. Connect the computer to the power source. Make sure the computer stays plugged in to power
source during the recovery process.
2. Turn on the computer, and when the boot screen shows up, press F6 to initiate the Recovery
Wizard.
3. The following screen shows the Recovery Wizard. Click Recovery button to continue.
4. A warning message about data loss will show up. Make sure the data is backed up before
recovery, and click Yes to continue.
5. Wait the recovery process to complete. During the recovery process, a command prompt will
show up to indicate the percent of recovery process complete. After complete the recovery
process, the system will be turned off automatically. Please restart your system manually to
complete the OS initialize process.