Winmate IK70 User Manual page 84

USER MANUAL
BIOS Setting
ME State
Manageability
Features State
AMT BIOS
Features
AMT
Configuration
ME Unconfig on
RTC Clear State
Comms Hub
Support
JHI Support
Core BIOS Done
Message
Firmware Update
Configuration
PTT Configuration
ME Debug
Configuration
CHAPTER 4
Description Setting
Option
ME State Disabled
configuration Enabled
Manageability Disabled
Features State Enabled
configuration
AMT BIOS Disabled
Features Enabled
AMT Enter
Configuration
ME Unconfig on Disabled
RTC Clear State Enabled
Comms Hub Disabled
Support Enabled
JHI Support Disabled
Enabled
Core BIOS Done Disabled
Message Enabled
Firmware Enter
Update
Configuration
Enter
- 84 -
INSYDE H20 BIOS SETUP
Effect
When Disabled ME will be put
into ME Temporarily Disabled
Mode
Enable/ Disable Intel
Manageability Features
Note: this option disabled/
enables Manageability Features
support in FW. To disable
support platform must be in an
unprovisioned state first.
Enable/ Disable Intel Active
Management Technology BIOS
Extension.
Note: iAMT H/W Is always
enabled. This option just
controls the BIOS Extension
execution.
Opens sub-menu
Disabling this option will cause
ME not to unconfigure on RST
clear
Enable/Disable support for
Comms Hub
Enable/Disable Intel DAL Host
Interface Service (JHI)
Enable /Disable Core BIOS Done
message sent to ME
Opens sub-menu
Opens sub-menu