Winmate IK70 User Manual page 68

USER MANUAL
BIOS Setting Description
Boot Configure Boot
Performance Performance Mode
Mode parameters
Intel Configure Intel
SpeedStep (ta) SpeedStep (ta)
parameters
Intel Speed Configure Intel Speed
Shift Shift Technology
Technology parameters
-Turbo Mode Enable or disable
Turbo Mode
C states Enable or disable
C states
Custom Configure Custom
P-state Table P-state Table
parameters
-Number of Select the number of
P-states custom P-states.
CHAPTER 4
Setting Option
-Max non-turbo
performance
-Max battery
-Turbo
Performance
Enabled/
Disabled
Enabled/
Disabled
Enabled/
Disabled
Enabled/
Disabled
Enter
[Number]
- 68 -
INSYDE H20 BIOS SETUP
Effect
Select the performance
state that the BIOS will
set starting from reset
vector
Allows more than two
frequency ranges to be
supported
Enable/ Disable Intel
Speed Shift Technology
support. Enabling will
expose the CPP v2
interface to allow for
hardware controlled
P-states
Enable/ Disable
processor Turbo Mode
(requires EMTTM
enabled too). Auto
means enabled, unless
max turbo ratio is bigger
than 16 – SKL AO W/A
Enable/ Disable CPU
Power Management.
Allows COU to go to C
states when it is not
100% utilized
Enters sub-menu
Set the number of
custom P-states. At least
2 states must be present