Basic Function Keys; Dimensional Function Keys - Calculated Industries 4088 User Manual

basic function Keys

On/Clear Key — Turns on power. Pressing once
O
clears the last entry and the display. Pressing twice
clears all non-permanent values.
gO Off — Turns all power off. Clears all non-
permanent values.
+-*
Arithmetic operation keys
,=
0-9
Keys used for entering numbers.
and .
Convert — Used with the dimensional keys to
g
convert between units or with other keys to access
special functions.
Store — Used for storing values.
gr
gr Storage Registers M1 through M9 — Used to
store values in memory registers 1 through 9.
1-9
Recall — Used with other keys to recall stored
r
values and settings.
Memory Clear — Clears Accumulative Memory
rr
and displays total.
Accumulative Memory — Adds displayed value to
M
Accumulative Memory.
M- — Subtracts displayed value from
gM
Accumulative Memory.

Dimensional function Keys

m
Millimeters (mm) — Identifies entry as
millimeters, with repeated presses toggling
between linear, area and volume units.
Also converts dimensional value to units of
millimeters, with repeated presses toggling
between millimeters and meters.
User's Guide — 5