letter Drill size entry
You can enter letter Drill Sizes by selecting an alphabet
character via Alpha Mode (g8) and then storing it using
the D key. The desired letter can be selected by scrolling
through Alpha Mode until the letter is reached or by specifying
the numerical order of the letter within the alphabet prior to
entering Alpha Mode. Both methods are shown below.
Select Drill Size E by scrolling through Alpha Mode. Then,
select Drill Size g by entering the numerical order of the letter
(the letter g is 7th in the alphabet):
1. Enter Alpha Mode:
2. scroll until the letter E is displayed:
3. Enter as Drill size:
4. View next larger available sizes:
OO
g8 (Alpha)
8888
D
D
D
D
alpha character
a
alpha character
e
"e" Drill
siZe
6.40mm Drill
siZe
6.50mm Drill
siZe
"f" Drill
siZe
User's Guide — 35
0.
1.
5.
0.250 inch
0.252 inch
0.256 inch
0.257 inch
(cont'd)