Drill Sizes; Numeric Drill Size Entry - Calculated Industries 4088 User Manual

DrIll SIzES

The D key allows the selection of a desired Drill Size,
which can be entered as a:
● Numeric value (whole digits 1 through 97)
● Letter between A and z
● Fractional or decimal Inch value (max. of 3-1/2")
● Millimeter value (max. of 78 mm).
The selected Drill Size is displayed along with its decimal Inch
equivalent. If the entered value doesn't match a Drill Size,
the nearest Drill Size is displayed. You can scroll through the
available sizes in increasing order with either the D key
or the + key. The - key displays the available sizes in
decreasing order. To set the displayed Drill Size, press O
(or any other key).

numeric Drill size entry

Enter a #36 Drill and scroll through the next larger available sizes:
1. Enter the Drill size:
2. Display the next larger available sizes:
* Repeated presses of D display the next larger Drill sizes. The
+ and - keys will scroll forward and backward, respectively,
through all available Drill sizes.
34 — M
achinist
OO
36D
D
D
D*
c P 2
alc ro
®
#36 Drill
siZe
2.75mm Drill
siZe
7/64" Drill
siZe
#35 Drill
siZe
0.
0.107 inch
0.108 inch
0.109 inch
0.110 inch