1. Face Milling (Default)
2. End Milling
3. Slot Milling
tools
The Machinist Calc Pro 2 has three built-in Tool Types that can
be used to determine tabular Feed and Speed values.
You can scroll through the available Tool Types by repeatedly
pressing the L key, or by pressing the + key or - key to
scroll forward and backward through the Tools.
You can also enter the assigned number (see listing below),
then press the L key to select the Tool Types, which will
be set until you select another Tool or perform a Clear All
(g*).
1. High Speed Steel (Default)
2. Carbide
3. High Performance
rpm (SpINDlE SpEED)
RPM is the rotational speed of the spindle in revolutions per
minute. In a milling machine or drill, the Spindle Speed is the
rotation of the attached cutting tool. In a turning machine, it is
the rotation of the attached workpiece. RPM can be calculated
given values for Diameter and Cutting Speed.
rpM - Basic
Calculate the RPM when milling with a 0.375" bit at a Cutting
Speed of 300 sfm (surface feet per minute):
1. Enter the bit Diameter:
OO
4. Turning
5. Boring
6. Drilling
User's Guide — 17
0.
(cont'd)