Calculated Industries 4088 User Manual page 66

(cont'd)
3) Functional
Result
Rounding
4) Area Answer
Format
66 — M
achinist
– 0.000 (fix): calculation results using
Machinist functions are always
displayed to three decimal places.
– 0.0000 (fix): calculation results
using Machinist functions are always
displayed to four decimal places.
– 0. (actUal): calculation results
using Machinist functions are always
displayed to the maximum number of
decimal places.
– stanDarD: if units entered are
the same – e.g., Inch x Inch – area
answers will remain in this format
(Square Inch), but if units entered are
different – e.g., Inches x Feet – area
answers will be displayed in Square
Feet.
– sQUare feet: area answers always
displayed in Square Feet, regardless
of unit entry – e.g., Inches x Inches =
Square Feet.
– sQUare inches: area answers
always displayed in Square Inches,
regardless of unit entry – e.g., Feet x
Feet = Square Inches.
– sQUare Meters: area answers
always displayed in Square Meters,
regardless of unit entry – e.g., Feet x
Feet = Square Meters.
c P 2
alc ro
®